EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122


750 Twin Afterburner Pump Core Sleeve/Adjustable Cone Kit - Now Available

Transform the O.E.M Kawasaki SXR 800 Pump into a high performing large hub, high pressure axial flow design inexpensively with the exclusive R&D Large Hub Afterburner Pump Core sleeve and adjustable Anti-cavitation Pump Cone Kit design . Experience much better hole shots and 1 mph plus gains in top speed performance with the added pump efficiency and thrust. The Afterburner Pump Core will drastically increase pump hook up and rear end traction. The innovative and superior R&D design allows impeller changes to be made easily in minutes. The Afterburner Anti-cavitation rear cone length is tunable with kit supplied spacer shims which allows custom peak RPM tuning for any brand or pitch of impeller with a 73-75mm hub. Better holeshots, hook up, top speed, tuneability, and R&D quality at a very reasonable price! Dollar for dollar the R&D Afterburner Pump Core Kits performance cannot be beat. The R&D Afterburner Pump Core Kit will install into all 1992-2006 Kawasaki 750-800 stand up model pump housings.

Pt. # 161-00801


 

750 Twin Afterburner Tunable Pump Cone for Skat-Trac Pumps - Now Available

The new R&D Afterburner Pump Cone for all Skat-Trac SXR 800 Pumps allows for custom peak rpm tuning. With the kit supplied spacer shims you can now fine tune the pump for maximum RPM and speed!

Pt. # 161-00804


 

750 Twin Tru-Align Driveline Couplers - Now Available

The new billet aluminum design delivers maximum strength and balance for those high horsepowered Kawasaki's. These couplers allow for precision engine alignment which drastically reduces vibration. Accepts OEM rubber biscuit.

Pt. # 611-75001


 
750 Twin Pro Super Stock Pump Cone - Now Available

The R&D Pro Super Stock Pump Cone is designed specifically for Super Stock SXR 800's. The cone mounts directly to the R&D Afterburner Pump Core Sleeve and comes complete with two tuning shims and hardware.

Pt. # 161-00803


 

750 Twin Dominator M-16 Sidedraft Manifold Kit - Now Available

A new and industry first for the Kawasaki SXR 800 is the innovative R&D Dominator M-16 Sidedraft Intake Manifold System! Four to six peak horsepower gains on limited’s and eight to ten peak horsepower gains on superstocks! “An incredible low end and mid range power gain” quoted 10 time World Champion Jammin’ Jeff Jacobs, and “The most bottom and mid range power gain I’ve ever felt from a carburetion setup” quoted Rob Flores during pre-reproduction testing! The technology in the new Dominator Manifold and M-16 Reed System has powered factory YAMAHA and KAWASAKI race teams to every Pro 1200 cc World title since 2000, and has won 2 Pro 800 cc World titles. After three years of intense testing on the Kawasaki SXR 800, R&D has mastered the technology for a stand up model! The R&D Dominator M-16 Intake System will guarantee blistering acceleration and mid range performance, and is a must have accessory for the 2005 World Finals! Very easy to install, easy to tune, and works with any aftermarket 46 or 48 mm carburetor!

The Dominator Intake Manifold Kit comes complete with all necessary bolt-on hardware and R&D Power Plenum Filter (M-16 reed valves sold separately), and has jetting specifications for all 46 & 48 mm aftermarket carburetors. The Dominator Intake Manifold System is designed to be used exclusively with the R&D M-16 Reed Valve System. R&D offers optional accessory linkage systems, throttle drums, splash reflector trays, and throttle shaft butterfly saver locks!

Pt. # 231-00800 Dominator M-16 Sidedraft Intake Manifold Kit
Pt. # 261-30750 Dominator M-16 Reed Valve Kit
Pt. # 290-80000 Dominator M-16 Linkage Kit
Pt. # 371-80001 Dominator Mikuni Multi-position Throttle Drum
Pt. # 371-80000 Dominator Splash Reflector Tray Kit


 

750 Twin Rear Sponson - Now Available

The new R&D SXR 800 rear Sponson kit affix beneath the bond flange at the rear of the craft. This race proven design enhances overall handling of the craft allowing you to charge harder through rough water conditions with new found confidence.

Pt. # 121-00800

750 Twin Rule Bridge Mount Bracket - Now Available

The R&D Rule Bildge Pump Mount Bracket bolts securely to the hull developing a secure surface to hold the bildge pump in place. 

Pt. # 660-80000

R&D/Solas 750 Twin Impeller - Now Available

R&D/Solas Concord Impeller will reduce cavitation, and add to top speed performance.

Pt. # 131-01322 - Recreational Prop - Solas 13/22 Dynafly
Pt. # 131-01423 - Limited Prop - Solas 14/23 Dynafly

750 Twin Reed Valve Spacer Kit - Now Available

The R&D Reed Valve Spacer Kit will relocate the reed valves to a longer intake track and add to crankcase volume! The combination of a longer intake track and added crankcase volume will add a significant boost in Low-end acceleration! The R&D Reed Valve Spacer Kit works especially well with the Factory Pipe exhaust kit!

Pt. # 251-75010
Pt. # 251-80000 Angled Type Design

750 Twin Pump Shoe Seal Kit - Now Available

New for the Kawasaki 750/800 stand-ups is our exclusive R&D Pump Shoe Sealing Kit. The new kit comes complete with individually molded cavity plugs that are designed to fill the large cavity air pockets in the OEM pump shoe. By plugging these cavities completely and resealing the shoe to the pump with silicone sealer the pump cavity will be 100% free of any possible air pockets or leaks that promote cavitation.

Pt. # 161-80000

750 Twin Timing Kit - Now Available

The R&D SXR 800 timing kit produces a substantial performance gain with the OEM ignition system. By relocating the pickup trigger on the ignition cover a full six degrees of ignition timing is available. Initial ignition timing from 0-2000rpm boosted from 14 degrees to 20 degrees, mid 3000-5000rpm from 20 to 26 degrees and overall 6500rpm + from 12 to 18 degrees. Easy installation.

Pt. # 441-75001

750 Twin Inline Intake Manifold - Now Available

The new SXR 800 Mikuni Super BN 46mm Intake Manifold/Carb Plate is built with 120mm carb centers (exact engine centers) and designed to match the OEM Reed Valve with R&D Stuffers (Pt. # 271-75000). Made from cast aluminum this manifold makes it easy to mount larger carbs that the 800 powerplant responds well to.

Pt. # 231-75146
Pt. # 231-75148 matches V-Force Reed

750 Twin Power Plenum Filter - Now Available

The R&D Power Plenum for the Kawasaki SXR 800 is the filter of choice. Dyno tested and championship proven Power Plenum Filters generating the maximum airflow and volume, period. Which means more horsepower, increased throttle response, acceleration and top speed. The exclusive lightweight R&D design incorporates velocity stacks and is engineered to improve air speed. The unique Pro-Lock base allows for quick removal, for those spontaneous carb adjustments. They are maintenance free, all you have to do is bolt them on and go. Immediate championship performance for your Kawasaki.

Pt. # 200-00800 Stock carb application
Pt. # 200-00120 Aftermarket carb application

750 Twin Driveshaft Shim Kit - Now Available

The R&D driveshaft shims install into the prop snout and remove the unwanted play or float the driveshaft has in the prop/pump assembly. Properly shimming the driveshaft will keep the driveshaft couplers fully engaged. Fully engaged couplers eliminates premature rubber dampner wear and failure.

Pt. # 161-00810


750 Twin Rapid Ratio Steering Plate - Now Available

The R&D 750 Twin Rapid Ratio Steering Plate was designed to increase steering nozzle turning ratio with three adjustable steering cable ball pivot positions (Stock, plus 8 mm, and plus 16 mm). The R&D Steering Plate also has a redesigned stop system, which will allow the steering plate to be relocated 1” Forward. NOTE: Must use the R&D twin position sub-plate position for 1” relocation capabilities.

Pt. # 521-80010


750 Twin Engine Shims - Now Available

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

750 Twin Handlepole Spring Shim - Now Available

The R&D Spring Shem adds preload to the Handle Pole Spring which reduces handle pole weight 50%. The lighter handle pole reduces back, shoulder, and arm fatigue. The stainless steel constructed shim installs in less than 5 min. with basic tools.

Pt. # 521-75100

750 Twin Pro Series Head - Now Available

Pro Series 750 Kawasaki heads are cast aluminum with an internal gusseting design that adds strength so the head will not lift under compression. Sure Seal O-ring combustion chambers and silicon sealed water jacketing eliminates blown head gaskets. The cast design incorporates cylinder girdle mounts along with enlarged water jacketing for cooling down those high horse power motors. Available in 23 thru 29cc ranges. (Girdle hardware sold separately Pt. # 411-75000)

Pt. # Specifiy cc Volume 

750 Twin Pro Aquavein - Now Available

The new R&D Kawasaki SXI PRO Aquavein is available. Offering maximum hook-up through its dual wing design. The patented wing design and extra deep channel rails eliminate cavitation and allow for quicker acceleration with improved speed and handling. It's now wonder R&D Aquaveins are the # 1 selling intake grate in the world and have won the Watercraft Readers Choice Award every year since its inception.

Pt. # 111-75101 SX/SXI
Pt. # 111-75102 '98-'02 SXI

750 Twin Reed Stuffers - Now Available

The R&D Reed Stuffers for the Kawasaki 750 has been relied on over the past decade to deliver stronger power. This stuffer is designed to drop into the OEM reed valve and create a blue printed match between the OEM manifold and reed valve. Stuffing up the reed eliminates air turbulence, creating maximum airflow, improved velocity to the intake ports, and allows the engine to pull more fuel through bottom and mid range rpm. Producing crisp throttle response and increased bottom and mid power.

Pt. # 271-75001 for OEM manifold
Pt. # 271-75000 for R&D manifold

750 Twin Power Plenum Filter - Now Available

The R&D Power Plenum for the Kawasaki 750 is the filter of choice. Dyno tested and championship proven Power Plenum Filters generating the maximum airflow and volume, period. Which means more horsepower, increased throttle response, acceleration and top speed. The exclusive lightweight R&D design incorporates velocity stacks and is engineered to improve air speed. The unique Pro-Lock base allows for quick removal, for those spontaneous carb adjustments. They are maintenance free, all you have to do is bolt them on and go. Immediate championship performance for your Kawasaki.

Pt. # 200-92750 '92-'94 SX Single Cone Filter
Pt. # 200-95750 '95+ SXI/STX/ZXI/STS

R&D/TTO Tachometer

The R&D/TTO Tach is water resistant and will monitor two and four stroke single and multiple cylinder applications to 10,000 rpm within 10rpm accuracy. Functions including: peak rpm memory, hour meter, rpm recall and constant rpm display.

Pt. # 802-12104

750 Twin Pro Ride Plate - Now Available

The new R&D SXI PRO Ride Plate features a redesigned bottom for improved straight line stability and superior cornering. The cast aluminum design offers a negative plain angle that lightens the nose for up to 1 mph speed gain. Endorsed by all team R&D Kawasaki SXI PRO riders.

Pt. # 121-75100 750 SX/SXI Speed Plate
Pt. # 121-75101 750 SX/SXI Pro Series Plate
Pt. # 121-75102 '98-'02 SXI

 
  © 2004 R&D Performance Products USA. All Rights Reserved.