EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122



R&D Ultimate Pump Seal

The R&D Ultimate Sea-Doo Pump Seal was developed to create a 100% positive seal without the use of silicone sealers. That’s right, no more silicone needed! The R&D seal easily snaps tightly onto the pump face and assembles snuggly into the stock plastic mounting plate, creating a solid seal between the mating surfaces. The new solid seal eliminates cavitation, and improves holeshots, hook up and acceleration.

The R&D Pump Seal Kit will also allow quick impellor changes and super quick pump installs. The R&D Pump Seal Kit will prove itself to allow lower pitched impellor combinations to work extremely well without cavitation.

At R&D we have been working tirelessly on the RXP-X trying to establish an impellor and pump package that will pull holeshots without cavitation in Pro Stock class competition. The R&D pump seal has enabled us to successfully achieve our goal. And it will help you too. Call R&D and order your seal today and get hooked up.

Note; The R&D Seal performs so well to eliminate low and high speed cavitation, that top end rpm may be reduced. Call R&D at 562-906-1190 for the best impellor combination for your set up.


• Seals pump 100%
• Eliminates cavitation
• Improved acceleration and holeshot
• Easy install directly to stock location
• Allows super fast Impellors to hook up without cavitation


Pt. # 163-81500 Replaces OEM Pt. # 293200087

Fits models:
2003-2008 All 4-Tech
2009 All 4-Tech (Except 09 GTX LTD IS 255 & 09 RXT IS 255)
2010 All GTI, RXP-X 255/RS, WAKE 155
2011 GTI, GTS, RXP-X 255/RS, WAKE 155
2012-13 All 4-Tech


Pt. # 163-81501…Replaces OEM Pt. # 293200122

Fits models:
2009 GTX LTD IS 255 & 09 RXT IS 255
2010-11 GTX, RXT, WAKE PRO 215


951 2.5 Degree Nozzle Wedge Kit - Now Available

The R&D 2.5 degree reduction nozzle wedge kit for the new Sea-Doo 951 was designed, developed and tested extensively in all types of flat and rough water conditions to ensure that there would be no compromises any where in the Sea-Doo 951's handling performance! Most brands of watercraft have some form of V.T.S. (variable trim system) including other model Sea-Doo's. Why the 951 doesn't have a trim system is a mystery. It's about the only feature that this model is missing! Extensive testing has led our development team to wedge the reduction nozzle up 2.5 degrees which will inexpensively give your 951 better handling everywhere and provide a boost of 1 to 2 mph in top speed performance. The billet aluminum CNC machined 2.5 degree reduction nozzle wedge kit was designed to work with the OEM O.P.A.S. system and installs easily in 15 to 20 minutes with R&D's "easy install" directions.

Pt. # 143-95001

951 Sea-Doo Engine Shims - Now Available

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

951 Sea-Doo Intake Manifold - Now Available

The R&D 951 Intake Manifold has a redesigned intake port that creates velocity and improves horsepower throughout all rpm range. It is a direct replacement that mounts the stock carbs. Matching the reed stuffers (sold separately).

Pt. # 223-95000

951 Sea-Doo High Torque Reed Stuffers - Now Available

The plastic injection molded R&D winged stuffers creating maximum air delivery through improved velocity, producing crisp instant throttle response, and power increase throughout the entire RPM range. The stuffers match up to the R&D 951 Intake Manifold to complete the performance duo.

Pt. # 273-95000

951 Sea-Doo Power Plenum Air Filter - Now Available

The R&D 951 Power Plenum installs in 30 minutes and produces a 14 horsepower increase @ 4600 rpm, That's about 5 times more than any other filter. The unique design is maintenance free and is used by factory Sea-Doo on all RXX Sea-Doo's produced.

Pt. # 203-95000

951 XPL/RX/RXX Aquavein - Now Available

R&D's Aquavein Intake Grate for the Sea-Doo 951 XPL / RX / RXX is available now. It's unique wing design eliminates cavitation, improves acceleration, and allows superior cornering and control. Cast in tongues at the rear of the grate are designed to lock into the R&D Ride Plate to eliminate the rear inserts from pulling out.

Fits the following models:
98-99 XP LTD, 00-02 XP/RX, 00-03 RX DI, RXX, 03-04 XP DI

Pt. # 113-00002 for use with R&D Ride Plate Pt. # 123-80620
Pt. # 113-00003 for use with stock ride plate

951 XPL/RX/RXX Ride Plate - Now Available

The R&D Ride Plate features a redesigned bottom for improved straight line stability and superior cornering. The negative plain angle lightens the nose for up to 1 MPH more speed. The cast aluminum design installs with all standard hardware in approx. 15 min.

Pt. # 123-80620

951 GSXL/GTXL/LRV Aquavein Intake Grate - Now Available

The R&D Aquavein Intake Grate for the Sea-Doo GSXL / GTXL / LRV is designed to eliminate cavitation through the unique rear water ramp and tear drop rails. These unique features offer improved acceleration and superior cornering with smooth straight line performance. Cast aluminum construction and ball burnished shinny finish. Tested by team Sea-Doo's Chris Fischetti and Group K's Harry Klemm.

Fits the following models:
97-99 GSX LTD, 98-99 GTX LTD, 00-02 GTX, 00-01 GTX DI, 00-01 LRV, 02 LRV DI

Pt. # 113-80401

R&D/TTO Tachometer

The R&D/TTO Tach is water resistant and will monitor two and four stroke single and multiple cylinder applications to 10,000 rpm within 10rpm accuracy. Functions including: peak rpm memory, hour meter, rpm recall and constant rpm display.

Pt. # 802-12104

  © 2004 R&D Performance Products USA. All Rights Reserved.