EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122

FX H/O O2 Sensor Mount Kit

The new R&D O2 Sensor Mount Kit allows for easy installation of an AFR gauge into the Yamaha exhaust system. It simply replaces the OEM plug and installs directly into the OEM exhaust pipe without any modifications. Kit comes complete with installation tool. Fits Yamaha SHO, FX-140, H/O, GPR, and VX 110. AFR gauge sold separately.

Pt. # 332-18010

FX H/O Powershot Adjustable Fuel Tuner - Now Available

R&D Performance Products, U.S.A. announces the release of the new R&D Powershot fuel injection tunning module and fuel controller. The R&D Powershot fuel injection tuner will deliver increased horsepower, acceleration, and stronger mid-range performance by delivering a higher performing air to fuel ratio (A.F.R.) to the engine. Many of today’s high performance fuel injected four stroke muscle craft have a lean A.F.R. R&D Performance has tested, documented, and analyzed the O.E.M. fuel maps on every current fuel injected four stroke watercraft, and pre-programmed and coded the new R&D Powershot fuel injection control module to safely alter the O.E.M. fuel map to a higher performing and safer A.F.R. (richer). More horsepower, greater acceleration and stronger mid-range are the result when the proper A.F.R. is achieved and is tuned for optimum performance.

The R&D Powershot is fully adjustable on the fly (with the engine running, observed and tuned while riding), and will accommodate a wide range of adjustability to properly performance tune the A.F.R. for any combination of aftermarket parts. The R&D Powershot will add horsepower, reliability, and adjustability to any electronic fuel injected two or four stroke watercraft engine.

R&D has a Powershot unit for virtually every watercraft application! Available for all two and four stroke fuel injected SeaDoo, Yamaha, Kawasaki, and Honda watercraft. The R&D Powershot is a must have part on supercharged SeaDoos using new vortech performance high boost compressor wheels, and Kawasaki 15Fs with offshore kits!

*For competition use only!

Pt. # 802-16000

FX H/O Anti-Cavitation Cone - Now Available

The new R&D Anti-Cavitation Cone is now available. The unique patent pending design balances the bowl pressure in the last stage of the pump to eliminate detectable cavitation. Improving bottom end punch, midrange pull and overall performance.

Pt. # 162-16000

R&D’s “BIG ASS” Prop Wrench

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is LEVERAGE! The 28” long wrenches are made from ½” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches.

Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster

Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet

Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VX
Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099)

Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS (Pt. # 132-55100)

Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR

Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”

Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ

FX H/O Solas Dynafly 14/20 Impeller - Now Available

The R&D Solas Dynafly 14/20 impeller will increase hook-up, acceleration and top speed performance.

Pt. # 142-11420

FX H/O Aquavein Intake Grate

The R&D Yamaha FX H/O Aquavein Intake Grate has been in the design, development, and testing stages for 2 years! The R&D H/O Aquavein will significantly reduce cavitation, increase acceleration, add up to 1 mph on top end performance, and keep the H/O pump loaded and hooked up! Works great on aftermarket supercharged models as well.

Pt. # 112-14000

FX H/O Hydro Force Steering Nozzle

R&D's new Hydro Force Steering Nozzle for the FX H/O is a direct replacement nozzle. The new lengthened design delivers a full 1 MPH speed gain over stock. The adjustable pivot point position improves the turning radius allowing you to carve tighter turns with a more positive feel. Improved performance through speed, acceleration and handling.

Pt. # 162-14000

FX H/O Cruiser Ride Plate - Now Available

The R&D FX H/O ride plate has been in the development stages for 2 years, and for you FX H/O owners anxiously awaiting this part, we guarantee you will be thrilled! Smoother and tighter cornering coupled with significantly improved straight-line stability will be noticed immediately! Our development team strived to create a ride plate design that eliminates the slight but annoying high-speed "bow search" that is noticed in the FX H/O OEM ride plate that occurs when riding at wide open throttle, and is more noticeable with ½ to full fuel loads! With the new R&D plate the "bow search" is eliminated, regardless of what the fuel load is. Additionally, the new R&D FX H/O ride plate delivers between a .50 and 1 mph speed increase as verified with a stalker pro series radar gun.

Try the new R&D FX H/O ride plate along with R&D's new FX H/O adjustable sponson kit, and have the ultimate handling package!

Mike Follmer, 2002 Off-Shore National Champion a Yamaha FX H/O owner says, "This kit makes my FX H/O feel more like my GP 1300R's handling! It turns tighter and it's much more stable at top speed!"

Pt. # 122-16000 05 and UP FX 140 / H.O. Ride Plate

FX H/O Engine Shims - Now Available

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

FX H/O Power Plenum Flame Arrester - Now Available

The new R&D Power Plenum Flame Arrester for the FX H/O is now available. The R&D High Flow Power Plenum replaces the restrictive stock flame arrester allowing improved air flow, why? Because more air flow with less restriction means more power! Designed to work with the R&D FX H/O Air Breather. This combination is the ultimate intake for the FX H/O.

Pt. # 200-00144

FX H/O High Flow Power Plenum Air Breather - Now Available

The new R&D high flow air breather for the FX H/O is now available. The R&D high flow breather is a direct replacement for the stock breather in the OEM air box. Water tested to deliver improved throttle response, acceleration and top speed with 50-100 RPM increase. Units with 15-20+ operational hours may see greater performance increases.

Pt. # 200-00143

FX H/O Velocity Stack Kit - Now Available

The R&D Velocity Stack Kit is a direct bolt-on kit that replaces the restrictive OEM stacks. Designed to increase air velocity into the throttle bodies producing improved throttle response and top end speed. Easily installs with OEM hardware. Dollar for dollar is the highest performing velocity stack available.

Pt. # 206-00140

FX H/O Pump Seal Kit - Now Available

R&D's new pump seal kit for the FX H/O stuffs up all the unwanted cavities in the pump shoe that aid in producing cavitation. This kit offers a way to seal the pump shoe, which will reduce cavitation and increase pump efficiency and performance.

Pt. # 162-00001

 
  © 2004 R&D Performance Products USA. All Rights Reserved.