EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122

O2 Sensor Mount Kit

The new R&D O2 Sensor Mount Kit allows for easy installation of an AFR gauge into the Yamaha exhaust system. It simply replaces the OEM plug and installs directly into the OEM exhaust pipe without any modifications. Kit comes complete with installation tool. Fits Yamaha SHO, FX-140, H/O, GPR, and VX 110. AFR gauge sold separately.

Pt. # 332-18010


GP 1200R VTS/ Auto Drop Nozzle Kit - Now Available

The new R&D VTS/Auto Drop Nozzle is the first manually activated VTS nozzle with Auto Drop functions! When riding with the VTS adjusted in neutral position the nozzle will drop 5 degrees in the turns allowing for a much smoother high speed turn to be made. When the steering reaches the straight position the nozzle returns back to the straight position. When riding with a full tank the best VTS setting is usually in the 1 click up position and stays there. With the R&D VTS Nozzle kit you can ride 1 click up (5 degrees up) and when you turn the nozzle will drop 5 degrees which is back to zero or straight position. When the steering returns back to straight the nozzle resumes the one click up (5 degrees up) position. This is one awesome kit! A must have for every GPR Wave Runner owner. The kit comes preset and it's amazingly easy to install! The ball burnished polished finish will add a racing look to your river racer. Another grand slam from R&D!

Pt. # 162-12001

GP 1200R Trim Pads - Now Available

We have improved our previous cast aluminum Ride Plate Trim Pad design by eliminating the step and grooves, and replanning the mounting surface! The new Ride Plate Trim Pad design will promote smoother and quicker planning under aggressive 0-30mph acceleration, produce an overall more stable ride, and has proven to have better top speed averages!

A must for all GP1200R's which comes stock with plastic trim tabs which allow flex.

Pt. # 122-13001

GP 1200R Ride Plate Kit - Now Available

The R&D GP1200R Ride Plate is up-dated for 2003. We have modified our production tooling to incorporate improvements found through hundreds of gallons of recreational testing and feedback from our racing programs during the 2001 and 2002 race seasons.

The plate mounting surface has been raised and re-angled, producing quicker and more stable planning from 0-30mph and smoother cruising at 50-60mph. There is also more positive straight line stability and better high speed cornering. We made some great improvements to our already successful design. This very ride plate design has been used for the past three years by almost all top IJSBA Factory Yamaha Race Teams and to date it is the only aftermarket ride plate to win the coveted Pro 1200 World Championship, 2 Indoor Pro 1200 World Championships, and dominate in the Offshore Championships for three consecutive years.
  • This is one fast ride plate!
  • Increases handling & top speed dramatically.
  • Installs easily.
  • Ball burnished finish gives a great polished finish look.

Pt. # 122-12001

GP 1200R Aqauvein Scoop Grate Kit - Now Available

We have added something special to our Aquavein packaging at no extra charge! The R&D Aquaveins' patented and proven design hasn't changed. However, for those who ride in the ocean or very rough conditions we have added shims to the kit. The shims allow you to lower the wing which will load your GPR pump with more water adding extra pump efficiency and traction! In rough water conditions average speed increases with the added hook up. The shims create 3 selections to choose from, R&D's "easy install" directions show you how in minutes!

Pt. # 112-12002 Two Bar Design
Pt. # 112-12100 Single Bar Design

GP 1200R Hull Inserts Kit - Now Available

The new R&D Plate and Pump Shoe Kits are now available. These inserts are CNC machined from aircraft aluminum and are fixed together by an aluminum strap to insure they do not spin upon installation or removal of the ride plate or pump shoe. Simply silicone them in place and mount the ride plate or shoe.

Pt. # 122-10000 Ride Plate Insert
Pt. # 122-10010 Pump Shoe Insert

R&D’s “BIG ASS” Prop Wrench

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is LEVERAGE! The 28” long wrenches are made from ˝” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches.

Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster

Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet

Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VX
Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099)

Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS (Pt. # 132-55100)

Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR

Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”

Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ

GP 1200R Solas Impeller - Now Available

Changing the OEM prop to a 13-19 or 14-20 Solas Impeller is a must for increased performance.

Pt. #132-01420 For top end performance 14/20.
Pt. #132-01319 For bottom end performance 13/19.

GP 1200R Engine Shims - Now Available

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

GP 1200R 1/2" x 1/2" Bulkhead Fittings - Now Available

The R&D Billet Aluminum Fitting allows for easy installation for extra cooling lines through the bulk head.

Pt. # 660-00012

GP 1200R 1/2" Inline Water Fitting - Now Available

The R&D Billet Inline Water Filter utilizes a screw in stainless steal mesh screen to stop small particles of sand from entering the water way of the engine.

Pt. # 660-00013

GP 1200R Cat Temp Sensor Chip - Now Available

The R&D Cat Temp Sensor Chip is a must when replacing the OEM Catalytic Converter with the R&D D-plate on your Yamaha GPR. The Temp Sensor imitates the signal sent to the OEM CDI by the Catalytic Converter’s temperature probe preventing CDI flutters, warning devices sounding and engine shut downs due to cat removal. The use of this sensor is only necessary with the OEM CDI. Plugs directly into factory wiring harness.

Pt. # 802-12001

GP 1200R Triple Cooling Block - Now Available

The new R&D Triple Cooling Block is now available, featuring three ˝" cooling outlets. Our testing has proven that one ˝" line to each cylinder will eliminate engine overheating. When the engine becomes heat soaked, like all GPR's do, the power fades away. The R&D cooling block delivers optimum cooling so the engine will not become heat soaked and will produce maximum power through out it's operating time. The block installs into the stock location and utilizes the stock o-ring to seal. R&D offers optional ˝" through hull fittings to ease installation.

Pt. # 660-12001

GP 1200R D-Plate - Now Available

The new R&D D-Plate takes the place of the stock Catalytic Converter and delivers the best overall low, mid, peek and overall horsepower. The benefits include reducing engine compartment temperatures created by the catalytic converter and reliability of the complete stock exhaust assembly.

Pt # 332-12000

GP 1200R Sound Suppression Removal Tube - Now Available

R&D is now producing the new Sound Suppression Removal Tube for the GPR. This modification allows the exhaust to free flow out of the water box adding bottom end punch and overall performance. Replacing of the stock plastic sound box with the R&D Sound Tube will eliminate potential melting failures in limited and superstock modified applications. Easily installs, no cutting of hoses necessary.

Pt. # 332-12001

R&D/TTO Tachometer

The R&D/TTO Tach is water resistant and will monitor two and four stroke single and multiple cylinder applications to 10,000 rpm within 10rpm accuracy. Functions including: peak rpm memory, hour meter, rpm recall and constant rpm display.

Pt. # 802-12104

GP 1200R Cast Aluminum Head - Now Available

The Performance Head from R&D will get your GPR motor running. This affordable precision cast design delivers all the performance of billet without the staggering price tag. Raising the OEM compression ratio boosts the horsepower and torque throughout the rpm range, increasing acceleration and speed. Available in 41cc, 39cc, and 37cc ranges and comes with all hardware. (Girdle kit hardware sold separate). Also available for the XL 1200 Limited.

Pt. # 412-20041 41cc
Pt. # 412-20037 37cc

GP 1200R Anti-Cavitation Cone - Now Available

The new R&D Anti-Cavitation Cone is now available. The unique patent pending design balances the bowl pressure in the last stage of the pump to eliminate detectable cavitation. Improving bottom end punch, midrange pull and overall performance. Recommended for use with Limited and Superstock watercraft.

Pt. # 162-12002

GP 1200R Reed Stuffers - Now Available

The new R&D Reed Stuffer for the GP1200R is now available. This stuffer is designed to drop into the OEM reed valve and create a blue printed match between the OEM manifold and reed valve. Stuffing up the reed eliminates air turbulence, creates maximum airflow, improved velocity to the intake ports, and allows the engine to pull more fuel through bottom and mid rpm range. Producing crisp throttle response and increased bottom and mid power.

Pt. # 272-12000

GP 1200R Power Plenum Filter - Now Available

The new R&D Power Plenum for the XLL 1200/2000 GP 1200R is now available. Dyno tested and championship proven Power Plenum Filters generate the maximum airflow and volume, period. Which means more horsepower, increased throttle response, acceleration and top speed. The exclusive lightweight R&D design incorporates velocity stacks and is engineered to improve air speed. The unique Pro-Lock base allows for quick removal, for those spontaneous carb adjustments. They are maintenance free, all you have to do is bolt them on and go. Immediate championship performance for your Yamaha.

Pt. # 200-00142

GPR Billet Exhaust Valves - Now Available

The new R&D Billet Exhaust Valves reduce the clearance between the valve and piston. This reduced clearance improves the seal which boosts the valve down compression ratio delivering greater bottom and mid range power. The billet engineered design is a direct performance bolt-on, guaranteed to never break in any application. Now being used by Factory Yamaha Racing.

Pt. # 332-12002  (Requires 3 for complete engine)

GPR Hydro Force Steering Nozzle - Now Available

R&D's new Hydro Force Steering Nozzle for the GPR is a direct replacement nozzle. The new lengthened design delivers a full 1 MPH speed gain over stock. The adjustable pivot point position improves the turning radius allowing you to carve tighter turns with a more positive feel. Improved performance through speed, acceleration and handling.

Pt. # 162-12000

GP 1200R Pump Shoe Seal/Shim Kit - Now Available

New for the Yamaha GP 1200R is our exclusive R&D Pump Shoe Sealing and realignment Kit. The new kit comes complete with ten individually molded cavity plugs that are designed to fill the large cavity air pockets in the OEM pump shoe. By plugging these cavities completely and resealing the shoe with silicone sealer your pump cavity will be 100% free of any possible air pockets or leaks that promote cavitation. Also new parts included in the kit are special stamped shims which can be installed during assembly! The shims when installed will promote a better shoe to pump impeller liner alignment! Proper alignment from the shoe to pump will promote much greater pump efficiency!

Pt. # 162-00000

GPR Tru-Align Driveline Couplers - Now Available

The new billet aluminum design delivers maximum strength and balance for those high horsepowered Yamaha's. These couplers allow for precision engine alignment which drastically reduces vibration. Accepts OEM rubber biscuit.

Pt. # 612-12000

 
  © 2004 R&D Performance Products USA. All Rights Reserved.