R&D’s “BIG ASS” Prop Wrench

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is LEVERAGE! The 28” long wrenches are made from ½” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches.

Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster

Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet

Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VX
Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099)

Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS (Pt. # 132-55100)

Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR

Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”

Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ



EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122

O2 Sensor Mount Kit

The new R&D O2 Sensor Mount Kit allows for easy installation of an AFR gauge into the Yamaha exhaust system. It simply replaces the OEM plug and installs directly into the OEM exhaust pipe without any modifications. Kit comes complete with installation tool. Fits Yamaha SHO, FX-140, H/O, GPR, and VX 110. AFR gauge sold separately.

Pt. # 332-18010

GP 800R Engine Shims - Now Available

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

R&D/TTO Tachometer

The R&D/TTO Tach is water resistant and will monitor two and four stroke single and multiple cylinder applications to 10,000 rpm within 10rpm accuracy. Functions including: peak rpm memory, hour meter, rpm recall and constant rpm display.

Pt. # 802-12104

GP 800R Anti-Cavitation Cone - Now Available

The new R&D Anti-Cavitation Cone is now available. The unique patent pending design balances the bowl pressure in the last stage of the pump to eliminate detectable cavitations. Improving bottom end punch, midrange pull and overall performance. Recommended for use with Limited and Superstock watercraft.

Pt. # 162-12002

GP 800R Power Steering Drop Nozzle - Now Available

The new R&D GPR Power Steering Nozzle automatically lowers the nozzle by the movement of the handle bars. This design puts down force on the nose of the boat while turning, allowing you to carve precisely through turns like a surgeon. The degrees of drop is adjustable to rider preference up to 14deg. Comes complete with all hardware.

Pt. # 162-12001

GP 800R Power Plenum Filter - Now Available

The new R&D Power Plenum for the GP 800R is now available. Dyno tested and championship proven Power Plenum Filters generate the maximum airflow and volume, period. Which means more horsepower, increased throttle response, acceleration and top speed. The exclusive lightweight R&D design incorporates velocity stacks and is engineered to improve air speed. The unique Pro-Lock base allows for quick removal, for those spontaneous carb adjustments. They are maintenance free, all you have to do is bolt them on and go. Immediate championship performance for your Yamaha.

Pt. # 200-00141

GP 800R Aqauvein Scoop Grate Kit - Now Available

We have added something special to our Aquavein packaging at no extra charge! The R&D Aquaveins' patented and proven design hasn't changed. However, for those who ride in the ocean or very rough conditions we have added shims to the kit. The shims allow you to lower the wing which will load your GPR pump with more water adding extra pump efficiency and traction! In rough water conditions average speed increases with the added hook up. The shims create 3 selections to choose from, R&D's "easy install" directions show you how in minutes!

Pt. # 112-00800 Two Bar Design

GP 800R Ride Plate Kit - Now Available

The R&D GP800R Ride Plate is up-dated for 2003. We have modified our production tooling to incorporate improvements found through hundreds of gallons of recreational testing and feedback from our racing programs during the 2001 and 2002 race seasons.

The plate mounting surface has been raised and re-angled, producing quicker and more stable planning from 0-30mph and smoother cruising at 50-60mph. There is also more positive straight line stability and better high speed cornering. We made some great improvements to our already successful design. This very ride plate design has been used for the past three years by almost all top IJSBA Factory Yamaha Race Teams and to date it is the only aftermarket ride plate to win the coveted Pro 1200 World Championship, 2 Indoor Pro 1200 World Championships, and dominate in the Offshore Championships for three consecutive years.
  • This is one fast ride plate!
  • Increases handling & top speed dramatically.
  • Installs easily.
  • Ball burnished finish gives a great polished finish look.

Pt. # 122-12001

GP 800R Trim Pads - Now Available

We have improved our previous cast aluminum Ride Plate Trim Pad design by eliminating the step and grooves, and replanning the mounting surface! The new Ride Plate Trim Pad design will promote smoother and quicker planning under aggressive 0-30mph acceleration, produce an overall more stable ride, and has proven to have better top speed averages!

A must for all GP800R's which comes stock with plastic trim tabs which allow flex.

Pt. # 122-13001

GP 800R Hydro Force Steering Nozzle - Now Available

R&D's new Hydro Force Steering Nozzle for the GP 800R is a direct replacement nozzle. The new lengthened design delivers a full 1 MPH speed gain over stock. The adjustable pivot point position improves the turning radius allowing you to carve tighter turns with a more positive feel. Improved performance through speed, acceleration and handling.

Pt. # 162-12000

GP 800R Pump Shoe Seal/Shim Kit - Now Available

New for the Yamaha GP 800R is our exclusive R&D Pump Shoe Sealing and realignment Kit. The new kit comes complete with ten individually molded cavity plugs that are designed to fill the large cavity air pockets in the OEM pump shoe. By plugging these cavities completely and resealing the shoe with silicone sealer your pump cavity will be 100% free of any possible air pockets or leaks that promote cavitation. Also new parts included in the kit are special stamped shims which can be installed during assembly! The shims when installed will promote a better shoe to pump impeller liner alignment! Proper alignment from the shoe to pump will promote much greater pump efficiency!

Pt. # 162-00000

 
  © 2004 R&D Performance Products USA. All Rights Reserved.