R&D’s “BIG ASS” Prop Wrench

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is LEVERAGE! The 28” long wrenches are made from ½” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches.

Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster

Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet

Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VX
Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099)

Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS (Pt. # 132-55100)

Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR

Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”

Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ



EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122

VX 110 Powershot Adjustable Fuel Tuner - Now Available

R&D Performance Products, U.S.A. announces the release of the new R&D Powershot fuel injection tunning module and fuel controller. The R&D Powershot fuel injection tuner will deliver increased horsepower, acceleration, and stronger mid-range performance by delivering a higher performing air to fuel ratio (A.F.R.) to the engine. Many of today’s high performance fuel injected four stroke muscle craft have a lean A.F.R. R&D Performance has tested, documented, and analyzed the O.E.M. fuel maps on every current fuel injected four stroke watercraft, and pre-programmed and coded the new R&D Powershot fuel injection control module to safely alter the O.E.M. fuel map to a higher performing and safer A.F.R. (richer). More horsepower, greater acceleration and stronger mid-range are the result when the proper A.F.R. is achieved and is tuned for optimum performance.

The R&D Powershot is fully adjustable on the fly (with the engine running, observed and tuned while riding), and will accommodate a wide range of adjustability to properly performance tune the A.F.R. for any combination of aftermarket parts. The R&D Powershot will add horsepower, reliability, and adjustability to any electronic fuel injected two or four stroke watercraft engine.

R&D has a Powershot unit for virtually every watercraft application! Available for all two and four stroke fuel injected SeaDoo, Yamaha, Kawasaki, and Honda watercraft. The R&D Powershot is a must have part on supercharged SeaDoos using new vortech performance high boost compressor wheels, and Kawasaki 15Fs with offshore kits!

*For competition use only!

Pt. # 802-00110


VX 110 Aquavein Intake Grate

The R&D Yamaha VX 110 Aquavein Intake Grate has been in the design, development, and testing stages for a Year! The R&D VX 110 Aquavein will significantly reduce cavitation, increase acceleration, add up to 1 mph on top end performance, and keep the pump loaded and hooked up!

Pt. # 112-00110


VX 110 Performance Air Filter Kit

The new R&D Performance Air Filter for the VX 110 is now available. The R&D High Flow Filter design replaces the restrictive stock filter inside the stock air box, allowing improved air flow. Why? because more air flow means more power and improved performance.

Pt. # 200-00110

VX 110 Pump Shoe Seal Kit

The R&D Pump Shoe Seal kit for the VX 110 is now available. The four piece Seal Kit stuffs up the unwanted cavities in the pump shoe and the oem intake grate that aid in producing cavitation. This kit allows you to seal up the area between the intake grate and pump shoe, which will reduce cavitation and increase pump efficiency and performance.

Pt. # 162-00110 For use with stock Intake Grate
Pt. # 162-00111 For use with R&D Intake Grate

 
  © 2004 R&D Performance Products USA. All Rights Reserved.