High Performance ECU Reprogramming Services

Dollar for Dollar Unbeatable “TUNED FOR YOU” Performance

R&D is proud to announce our new line up of Yamaha VXR and VXS ECU reprogramming services. The engineering staff at R&D have been testing and developing ECU programs to allow new performance levels to be reached for recreational enthusiasts and racers who are interested in more performance through reprogrammed the OEM ECU. Entry level programs will allow the enjoyment of a raised RPM limit settings, advanced ignition timing, and re-calibrated fuel maps.  The Ignition timing in each reprogram is developed to maximize performance with specific engine power enhancement kits matched to specific fuel octane levels. There are several versatile performance levels to choose from that work with as a stand alone product, in kit form, or various bolt on parts. Programs offered are recreational performance tuned with safe AFR values, and can be further custom tuned (Richened) to accommodate increased or custom performance levels. Higher performing programs are continuously under development and will be announced through updates on the R&D web site, so stay tuned. Custom program files can also be performed to accommodate just about any combination of performance level or type of fuel being used. R&D strongly suggests that AFR tuning be periodically verified using Innovate Products LM1 or LC1 Logging Kit also available from R&D. Take your ECU to the next level of performance and send it in for reprogramming today and have it back for the weekend. Normal turnaround time is 1 day.


Part #802-02801 R&D R1 ECU; Reprogrammed ECU for the VXR/VXS offers improved ignition timing map advancements that produce quicker acceleration and top speed performance. The fuel maps are tuned to offer a cleaner than stock (leaner idle), clean and green cruise areas which will keep fuel consumption either the same or better than stock in the cruising ranges, and an overall improvement to top speed or wide open throttle ranges. The rev limiter is raised to allow up to 8150 RPM’s that will promote a more positive pump hook up in rough water conditions. The R1 ECU programs are 89 and 91octane (pump fuel) safe. The R1 program file does not require a Powershot Fuel Tuner.

Part #802-02802 R&D R2 ECU; Reprogrammed ECU for the VXR/VXS offers improved ignition timing map advancements that produce quicker acceleration and top speed performance. The fuel maps are tuned to offer a cleaner than stock (leaner idle), clean and green cruise areas which will keep fuel consumption either the same or better than stock in the cruising ranges, improved hard acceleration enrichment for the hard core rider that want a more aggressive mid range acceleration, and an overall improvement to top speed or wide open throttle ranges. The rev limiter is raised to allow up to 8250 RPM’s that will promote a more positive pump hook up in rough water conditions. The R2 ECU programs are 91octane (pump fuel) safe. The R2 ECU program can be used with R&D Performer, Stage 1 and 2 kits. The R2 program file does not require a Powershot Fuel Tuner.

Part #802-02803 R&D R3 ECU; Reprogrammed ECU for the VXR/VXS offers a higher degree of ignition timing map advancements that produce quicker acceleration and top speed performance. The fuel maps are tuned to offer a cleaner than stock (leaner idle), clean and green cruise areas which will keep fuel consumption either the same or better than stock in the cruising ranges, improved hard acceleration enrichment for the hard core rider that want a more aggressive mid range acceleration, and an overall improvement to top speed or wide open throttle ranges. The rev limiter is raised to allow either 8350 or 8450 RPM’s that will promote a more positive pump hook up in rough water conditions. The R3 ECU programs are 91octane (pump fuel) safe. The R3 ECU program can be used with R&D Performer, Stage 1 and 2 kits. The R3 program file does not require a Powershot Fuel Tuner. Note: Please specify Rev Limit Setting at the time of ordering.




NOTE: Custom Rev Limiter settings available upon request.
 


 

R&D Powershot Adjustable Fuel Tuner

R&D Powershot Fuel Injection/Engine Tuning module for the YAMAHA VXR/VXS. The R&D Powershot will deliver increased acceleration, stronger mid-range, and increased top speed performance by delivering a higher performing air to fuel ratio (A.F.R.)  R&D Performance has data logged and analyzed the O.E.M. fuel map on the Yamaha  1.8 N. A. four stroke engine and documented that the fuel tables are a very green and stoichiometric. If quicker acceleration and stronger mid range power and the ability to have your cake and eat it too, then the Powershot is for you. The Powershot will allow you to adjust the fuel to either run green or mean.  The R&D Powershot interfaces with the stock E.C.U., and fuel injectors allowing piggy back adjustments to the fuel table.  The R&D Powershot comes pre-programmed and coded to safely alter the fuel map right out of the box for plug and play performance.  The R&D Powershot allows custom fuel tuning to cruise, acceleration, and top end zones. Top end fuel mixtures can be custom tuned from 13.5:1 (lean) to 11.5:1 (rich) on the fly. Quicker acceleration, stronger mid-range, and increased top speed performance is the result when the A.F.R. is tuned for optimum performance. The R&D Powershot is fully adjustable to accommodate and properly performance tune the A.F.R. for any combination of aftermarket parts. Unlock the YAMAHA VXR/VXS’s full performance potential with an R&D Powershot Engine Tuner. Call R&D today and get the latest high performance tuning parts, accessories, and information!

• Preprogrammed and Pre set to 12.5:1 (plug in and run)
• Allows overall fuel map tuning
• Utilizes O.E.M. ignition system
• Utilizes O.E.M. fuel injectors
• Retains all O.E.M. dash, warning, and service indicators
• 91 octane pump gas friendly
• Ultra easy 20 minute installation
 

*For competition use only!

Pt. # 802-18010


VXR/VXS Aquavein Intake Grate

The R&D Yamaha VXR Aquavein Intake Grate will noticeably increase overall handling performance, significantly reduce cavitation, increase acceleration, and add 1+ mph to top end performance in flat water conditions! A 2-3 mph speed improvement (over stock) will be gained in rough water conditions. The VXR Aquavein will deliver a noticeable increase in rear end traction, and top speed stability. Low and high speed cornering stability is also significantly increased. The R&D Aquavein is a must have performance part addition.

Pt. # 112-18020




R&D Pump Seal Kit

R&D's Pump Seal Kit for the VXR stuffs up all the unwanted cavities in the transom plate and pump shoe that aid in producing cavitation. This kit offers a way to seal the pump shoe, which will reduce cavitation and increase pump efficiency and performance.

Pt. # 162-00008 For Stock Scoop Grate
Pt. # 162-00009 For R&D Aquavein Scoop Grate


R&D Pro Series Ride Plate

The R&D Yamaha VXR Pro Series Ride Plate was developed using many of R&D’s race proven concepts that have powered Factory Yamaha Race Teams to multiple Pro Open National and World Championships. The new R&D VXR Adjustable Ride Plate delivers a perfect balance of a much improved straight line stability, great cornering capabilities, and the top speed performances in both flat and rough water conditions that you have come to expect from an R&D Ride Plate. The new adjustable design utilizes kit supplied shims to fine tune the performance for a perfect balance of speed/handling for rider weight or water conditions from drag to surf.   The plate design utilizes the vital OEM hull protection stainless steel pads, which safely disperse the pressure loads from the ride plate over a larger area on the hull. The new R&D VXR Adjustable Pro Series Ride Plate will meet the demands in performance whether being used for weekend recreational riding, closed course racing, surf, or offshore competition. Made in the USA from cast aluminum and powder coated for corrosion resistance. No other ride plate design concepts compare to R&D, guaranteed!  In fact, many Factory Backed Yamaha Race Teams have already proven the new R&D VXR Plate to be “The Plate To Use” on VXR’s with Vortech Supercharger and Garrett Turbo Charger kits at top speeds in the upper 80-90 MPH speed zones.

Top Speed Improvement Averages
Adjustable Design
Championship Proven Design Concepts
Unique Multi-step Concept
Improved Straight Line Stability
Significantly Improved Cornering
Reduced Chine Walking on High Speed Sweepers
Drives through Chop with Superior Stability
Retains Reverse Gate Operation


Mike Follmer, 2010 Off-Shore National Champion a Yamaha FZR owner says, "This ride plate kit makes the VXR feel more like my FZR's handling! It turns tighter and it's much more stable at top speed!"

Pt. # 122-18004



R&D Sponson Kit

The R&D Yamaha VXR Pro Series Sponson Kit is currently under development. Call for availability.

Pt. # 122-01820


 




R&D Sponson Extender

The new R&D Yamaha FZR Sponson Extender is designed to widen the nose of the sponson. This kit retros any R&D FZR/SHO Sponson Kit. The widened sponson improves cornering, handling and high speed stability. Machined from billet aluminum and black anodized for corrosion resistance.

Pt. # 122-01802

R&D Auto Trim Nozzle Kit

The R&D Auto Trim system is a fully adjustable and fully automatic trim system! The R&D Auto Trim automatically drops a rider preferred and adjustable 2-8 degrees. Drive from turn to turn never worrying whether the trim is in the best position for perfect turn negotiation! The R&D Auto Trim allows you to set the trim up your way to carve perfect turn every time!


Kit requires the addition of R&D 87mm Exit Nozzle (162-85795) which has VTS mounts and the R&D Billet Trim Ring (162-12101)

Pt. # 162-18020


R&D Performance Exit Nozzle

The R&D cast aluminum exit nozzle is designed to fine tune the pump and prop to maximize performance and rpm. The R&D exit nozzle is available in 2.5 and 5 degree up sweep angles. The 5 degree positive angle lightens the nose of the craft and adds top speed; this is great for recreational use. The 2.5 degree delivers improved performance in rough water conditions by producing more nose pressure to drive the hull through the bumps; this design is perfect for closed coarse and offshore competition. Both types are available in bore sizes of 80-90mm. Custom bore sizes from 80 to 90 available at no extra charge, specify size when ordering. The nozzle also offers 4 extra bosses that can be drilled and tapped for extra cooling fittings. The maintenance free R&D cast aluminum one piece construction exit nozzle is the better alternative to a removable ring design. With the new R&D nozzle the OEM reliability and safety is retained, because there is not a removable ring sleeve to vibrate loose, falls out, and get wedged in the steering nozzle, creating a whole new definition to the term “bucking”.

Pt. # 162-82800 2.5 degree / 80mm
Pt. # 162-82805 2.5 degree / 80.5mm
Pt. # 162-82810 2.5 degree / 81mm
Pt. # 162-82815 2.5 degree / 81.5mm

Pt. # 162-85800 5 degree / 80mm
Pt. # 162-85805 5 degree / 80.5mm
Pt. # 162-85810 5 degree / 81mm
Pt. # 162-85815 5 degree / 81.5mm

** Custom bore sizes available at no extra charge, specify size when ordering**



R&D Anti-Cavitation Cone

The R&D Anti-Cavitation Pump Cone Kit will reduce overall internal pump cavitation within the Yamaha's offset reduction/compression nozzle design. The O.E.M. reduction/compression nozzle is offset, while the O.E.M. pump cone/bearing cap remains straight which causes uneven pressures within the pump and reduction nozzle. The R&D Anti-Cavitation Pump Cone is offset and reshaped to match the O.E.M. reduction nozzle offset promoting even pressures, which will substantially reduce cavitation, increase pump hook up, boost acceleration, and increase top speed performance.

Pt. # 162-18000


R&D Anti-Cavitation Transom Plate Machining Modification

R&D’s Anti-Cavitation Transom Plate Machining Modification service is now available. The engineers at R&D have been successful at reducing pump cavitation by removing the restriction in the OEM Transom Plate. The OEM Transom Plate has a 3mm taper that restricts water flow in front of the prop. Removing this restriction significantly reduces cavitation and improves holeshot and hook up with any prop type or diameter. The service includes line boring the Transom Plate and blue printing the new pump shoe diameter to blend with the R&D Aquavein Intake Grate, and the sealing surface of the transom plate where it mounts the hull is also improved by plugging the OEM casting pocket in the face of the Transom Plate with R&D’s Sure Seal Urethane Material. Service turnaround time is 1-2 days. R&D also offers the service to a new OEM Transom Plate available for immediate shipping.  Machining is available for all FZR, SHO, VXR, and VXS models.

Pt #162-18004 Transom Plate Machining Service…Retail $179.95
Pt #162-18007 Complete new FZR/VXR/VXS Transom Plate w/Machining Service…Retail $399.95

 


 
R&D Billet Driveline Couplers

R&D Performance is proud to announce the release of the new Pro Comp. Billet Driveline Couplers. These precision couplers are made from billet aircraft aluminum and CNC machined to exact tolerance. R&D has increased the weight of the coupler set over stock which will promote smoother acceleration and improved rough water hook up. The R&D Billet Coupler set will also promote longer clutch life in the FZR and SHO Supercharged machines. Designed to fit all 2009 and later FZR, SHO, VXR, and VXS Yamaha’s.

Pt # 612-01801

 


 


R&D Power Plenum Filter Kit

The R&D High Performance Power Plenum Air Filter Kit was designed and developed exclusively for the new Yamaha 1.8 liter N.A. engine. The R&D filter kit will unleash low-end, mid-range, and peak horsepower trapped in the restrictive stock air box. The exclusive lightweight filter design couples to the OEM throttle body through a tuned built in velocity stack. The engineered oversized Tear Drop plenum, delivers the velocity and cubic air volume needed to add power. Power Plenum Filters generate the maximum airflow and volume. Performs well, sounds good, looks great, and will install in minutes. Kit comes complete with all necessary hardware.


Pt. # 200-01805


R&D Power Plenum Flame Arrester

The R&D High Flow Filter design replaces the restrictive stock filter inside the OEM air box. This is the only performance filter that utilizes the water resistant OEM air box, allowing improved air flow. Why? Because replacing the OEM paper filter element with the R&D high flow filter allows more air flow which equals more power and improved performance. The washable and reusable design means this will be the last filter you will ever have to buy.

Pt. # 200-01800




R&D Cold Air Inlet Kit

The R&D Cold Air Adaptor Kit is a simple kit that allows the front hatch cowling to be modified
by simply boring a hole in the cowling insert (located on the bottom side of the hatch cover) and installing the R&D molded plastic hose flange adaptor with kit supplied pop rivets. The R&D Flange allows one of the existing air intake hoses to be connected to the flange. The result is an inexpensive way to ventilate the engine compartment with cool outside air. The Cold Air Adaptor kit will improve airflow to the engine allowing power and RPM gains.

Pt. #
200-01806

R&D Power Sleeve Intake Manifold Upgrade Kit

The R&D Power Sleeve Intake Manifold Sleeve Kit was developed to increase airflow into and through the intake system by relieving restriction. The R&D Intake Manifold Sleeve replaces the OEM intake ribbon producing an unrestricted 40 CFM increase in air flow. The R&D billet sleeve mounts into the intake manifold and extends up into the throttle body creating a superior Venturi effect. The R&D Intake Kit will add low end and mid range throttle response, and a full 100 plus rpms (when coupled with the R&D Power Filter Kit) to top end performance to a stock VXR/VXS. The R&D Intake sleeve is an absolute must have part to remove intake manifold restrictions. True horsepower gains on the Yamaha start right here with the R&D Intake Kit. More airflow will equal more power.


Pt. # 232-18000
2011-2012 (Aluminum Manifold)
Pt. # 612-17997 2013+ (Plastic Manifold)

R&D Pro Tune Adjustable Cam Gear Kit

R&D’s High Performance Cam Gear kit for the VXR/VXS N.A. engine adds a noticeable increase in overall horsepower by custom tuning the OEM Camshafts LSA (lobe separation angle) set up. Tuning the OEM Cam’s LSA with R&D Pro Tune Cam Gears will increased torque with stronger bottom end and mid range acceleration, add up to 100 RPM, and up to 1 MPH to your existing engine package. Adjusting the camshafts LSA is a very simple “BOLT ON” modification with the R&D Pro Tune Adjustable Cam Gear Kit. 

Understanding the LSA concept principle is fairly easy. A wide LSA generally result in decreased valve overlap, later intake events, earlier exhaust events, and high intake manifold VACUUM (higher vacuum at idle) which produce great idle, smooth accelerating with mild low and top end power. Wide LSA’s are great for smooth low end torque and good fuel economy.  A narrower LSA will result in the opposite in intake events and in general, generated higher mid range and peak top end power.

The R&D Pro Tune Cam Gear Kit allows the LSA (lobe separation angle) to be adjusted on the VXR/VXS engine which will generate quicker throttle response, increased mid range and top end power. The R&D Pro Tune Cam Gears are billet CNC machined, Heat Treated, and ground from steel alloy to deliver durable strength with precise timing. The R&D Cam Gear Kit offers four possible LSA combinations that allow the cams to be precision tuned depending on the type of riding or racing and type of fuel. The R&D Cam Gear Kit utilizes the proven and precision O.E.M. shouldered bolt mount design to perfectly center, align, and time the cam and properly support the cast cam flanges from cracking and breaking over slotted gears that are known to break cam flanges. R&D knows that cam lobe profile and cam timing is the heart of a good running engine, In fact, R&D has built a specific engine designated for degreeing, checking and proving camshaft lobe specifications, LSA and LC combinations. Depend on the Pro’s at R&D to deliver all your horsepower needs.

• Increased throttle response, increased overall horsepower
• Increased rpm performance (+50-100 RPM Gain)
• 5 Horsepower Increase (10-12h H.P. increase with RC2 Cam)
• Precision CNC Billet, Ground, and Heat Treated Cam Gears (lighter than stock)
• R&D R1, R2, and R3 ECU Compatible
• Works well with R&D RC1/RC2 Cam Regrind and Valve Spring Kit upgrades
• Easy installation
• Bolt on Higher Horsepower Upgrade


PART # 612-93018



 
R&D 1.8 Racing Valves

R&D offers replacement High Performance Racing Valves that are designed to be lighter, stronger, and most importantly, outflow stock O.E.M. valves. R&D valves will flow 1.5 CFM more over stock valves with R&D’s race proven back cut seats and high flow undercut stems. Each R&D Valve is a one piece forged design from only the highest grades of stainless steel with a 52 HRC hardened tip for maximum strength that has a black nitrite surface coating for superior wear hardness and reduced carbon buildup. When building any 4 stroke race engine, there should be three questions! How light, how strong, and how much more power! R&D Racing Valves answer those questions and more, as well as deliver a measurable power gain!

R&D Valves are available in standard and 1mm oversize! At R&D, we have been there and tested that. There are only two choices of valves we recommend that work reliably in Yamaha engines, O.E.M. Yamaha stock valves, or the R&D Racing Valves. R&D Valves install with O.E.M. Valve locks which have proven to be the best valve locks. NOTE: R&D also offers Titanium Intake Valves. Call R&D for special orders.

• Superior strength
• Very Light
• Increased airflow (1.5 CFM Gain)
• Improved Peak Horsepower
• Black Nitride Coating for reduced friction
• Precision ground
• Highest Grades of stainless on the planet
• Excellent upgrade for Turbo Charged Applications!
• Ultra easy “ Drop In” installation
• Works great in R&D CNC Ported Heads!

Part #612-94010 Intake Valve STD (set of 8) Retail $249.95
Part #612-94011 Exhaust Valve STD (set of 8) Retail $339.95

Oversized Valves
Part #612-94012 Intake Valve +1mm (set of 8) Retail $274.95
Part #612-94013 Exhaust Valve +1mm (set of 8) Retail $364.95

Note: For Turbo Charged Applications, R&D Recommends STD Exhaust Valve Size


 


 
R&D High Performance Dual Valve Spring Kit

R&D has developed an economical solution for upgrading the valve train by offering a series of upgrade parts that will work great with the O.E.M. retainer and valve seals. R&D Valve Spring upgrades are recommended for all Turbo and Supercharged applications. R&D has documented that the seat tension or pressure on the stock springs is a low 52-55 pounds, and coil bind on the stock springs occurs .050” after full lift on the stock cams. As an industry rule or standard, as boost levels are increased to the engine, the valve spring seat pressure should be increased 1-2 pounds per pound of boost. As an industry rule, as RPM'S are increased, the spring pressure at full lift should be increased as well to reduce or eliminate valve float at high rpm frequencies. With the stock springs “short lift travel” shimming is NOT an option. Valve Springs MUST be upgraded.
Also to consider is valve spring travel at full cam lift, and to have enough spring clearance freedom to run high performance camshafts or add additional spring tension pressures without coil bind issues. The R&D spring kit parts were developed and used with stock retainers during the 2009 season and have proven their performance with an APBA/IJSBA Pro Open National Championship.
R&D dual springs are a “lightweight design” and manufactured from ultra clean, high tensile material with multi step surface treatments to improve fatigue strength and reliability. NOTE: R&D Spring Kits must use the R&D Bottom Spring Retainer Cups kit Pt. # 612-93006 for proper assembly and seat pressures!

Engine Tuning Features
• 70-75 pounds at seat, 140-150 pounds at full lift (standard spec.)
• Shim friendly, add R&D spring collar base shims to add 2 pounds per .010 shim added
• Allows the use of higher lift cams (up to +.080)
• Linear spring pressure curve allows smooth precision valve control, adds to overall horsepower
• High performance materials and surface finishes add to reliability

Pt. # 612-93001 Dual Valve spring kit (set of 16)



 
R&D High Performance Valve Shim Kits

The R&D spring base collar “shims” offer precision valve spring tension shimming to fine tune spring seat pressures based on boost pressures the engine will run at. The R&D shim kits are offered in the thicknesses of .010”, .020”, and .030”. Each shim kit will have 16 shims per kit.

Pt. # 612-93003 .010” Thick Shim Kit (set of 16)
Pt. # 612-93004 .020” Thick Shim Kit (set of 16)
Pt. # 612-93005 .030” Thick Shim Kit (set of 16)


 

R&D High Performance Bottom Spring Retainer Cups

R&D spring retainer cups will install under the R&D valve spring and support and house the bottom of the spring securely.  The R&D Spring Retainer Cups must be used with the R&D spring kits for proper assembly.  Use R&D Valve Spring Shim Kits to fine tune valve spring seat pressure.


Pt. # 612-93006


 


Springs


Ti Retainers


Cups
R&D High Performance “Super Single” Valve Spring/Ti Retainer/Cup Kit

R&D has developed an economical solution for upgrading the upper valve train by offering a one stop shopping parts upgrade kit that will work great in the 8500-9000 RPM range in an economical price range. The kit includes our “Super Single” chrome silicone valve spring, precision machined premium grade titanium top spring retainers, and custom designed bottom spring/locator cup. The R&D “Super Single” Valve Spring Kit is a recreational and offshore upgrade favorite which offers great valve control and adds gimproved strength and reliability by changing out the stock steel retainers known to crack for super strong, lightweight titanium! R&D has documented that the seat tension or pressure on the O.E.M. stock springs is a low 52-55 pounds, and coil bind on the stock springs occurs .050” after full lift on the stock cams. As an industry rule or standard, as boost levels are increased to the engine, the valve spring seat pressure should be increased 1-2 pounds per pound of boost. As an industry rule, as RPM'S are increased, the spring pressure at full lift should be increased as well to reduce or eliminate valve float at high rpm frequencies. With the stock springs “short lift travel” shimming is NOT an option. Valve Springs and Parts MUST be upgraded.

Also to consider is valve spring travel at full cam lift, and to have enough spring clearance freedom to run high performance camshafts or add additional spring tension pressures without coil bind issues. The R&D spring kit parts were developed and used during the 2009/2010 season and have proven their performance with two APBA Pro Offshore National Championships.

R&D “Super Single” springs are a “lightweight design” and manufactured from ultra clean, high tensile materials with multi step surface treatments to improve fatigue strength and reliability. NOTE: R&D also offers additional bottom cup shim kits for proper seat pressures adjustments and valve travel settings!

Features

• 70-75 pounds at seat, 140-150 pounds at full lift (standard spec.)
• Shim friendly, add R&D spring collar base shims to add 2 pounds per .010 shim added
• Allows the use of higher lift cams (up to +.080 more lift)
• Linear spring pressure curve allows smooth precision valve control, adds to overall horsepower
• High performance materials and surface finishes add to reliability

Pt. # 612-94000 High Performance “Super Single” Valve Spring/Ti Retainer Kit/Cup Kit (set of 16)


R&D Valve Spring Shim Kits

Pt. # 612-93003 .010” Thick Shim Kit (set of 16) (use for additional custom seat pressure shimming)
Pt. # 612-93004 .020” Thick Shim Kit (set of 16) (use for additional custom seat pressure shimming)
Pt. # 612-93005 .030” Thick Shim Kit (set of 16) (use for additional custom seat pressure shimming)


 
R&D High Performance Valve Stem Seal Kit

R&D offers High Performance Valve Stem Seal Kits manufactured from only the best high quality Viton rubber materials that will resist high valve guide and oil temperatures to maintain a good valve seal in all high rpm, high performance applications. When valve springs are changed out or periodic head service work is being performed, trust R&D Valve Stem Seal Kits at any performance level.

Pt. # 612-93007 Valve Stem Seal Kit (set of 16)


 
R&D High Performance Racing Cylinder Sleeves

R&D High Performance Racing Sleeves are made to precise specifications specific for the Yamaha FZR/SHO Supercharged engine. R&D Racing Sleeves install easily and properly using the flanged “top hang” register design. The “top hang” design when installed and seated properly will not drop or slip which will allow 100 percent head gasket contact for a positive head gasket seal. R&D Racing Sleeves are manufactured from the highest grades of centrifugally cast “Molly 2000” Chrome Molly Iron Alloy to provide superior strength and hardness. Trouble free installation, boring, and honing using kit supplied installation instructions and tips on final hone specifications for O.E.M. cast and R&D Forged Racing Piston Kits are included. When the time comes to repair wavy, scored, seized, or worn cylinders trust the pros at R&D. We have been re-sleeving race engines for over 40 years.

Pt. # 432-18000


R&D/JE


R&D/CP

R&D High Performance Forged Piston Kits

R&D Yamaha Forged Racing Piston Kits have been developed for the hard core race enthusiasts or precision engine builders who are looking to gain maximum horsepower and reliability from their racing engines. R&D offers high quality forged aluminum, heat treated, and CNC machined racing pistons for those who are adding a Turbo or Supercharger to the VXR 1800cc power plant. R&D recommends replacing the 11-1 OEM pistons with 9.5-1 compression pistons when installing a power adder like a Turbo or Supercharger. R&D Piston Kits are set up to offer proper valve clearances for high lift cams. High horsepower marine engines with high boost pressures are more prone to have detonation over conventional racing engines due to sustained loads. Forged pistons in marine applications are a must. Whatever performance platform you are planning to build, trust the pros at R&D with all your compression ratio, boost, and engine management needs.

R&D recommends upgrading to our High Performance Pistons and Rods in applications producing over 300 H.P. @ sustained RPM's 8,000+.

• Direct replacement piston kits for High H.P. applications
• High quality forged materials replace low performance cast
• Improved ring seal with Nascar Style ring sets
• Increased RPM’s and horsepower by reducing weight
• Works great with high boost compressor wheels and turbo kits
• Retains O.E.M. wrist pins

R&D/JE (for OEM bore)
Pt. # 432-18861 for 8.6-1 compression, OEM Replacement for SHO/FZR (4 Piston Kit)
Pt. # 432-18951 for 9.5-1 compression (4 Piston Kit)
Pt. # 432-18105 for 10.5-1 compression (4 Piston Kit)
Pt. # 432-18111 for 11-1 compression, OEM Replacement for VXR/VX HO

R&D/CP (for OEM bore)
Pt. # 432-19861 for 8.6-1 compression, OEM Replacement for SHO/FZR (4 Piston Kit)
Pt. # 432-19951 for 9.5-1 compression (4 Piston Kit)
Pt. # 432-19105 for 10.5-1 compression (4 Piston Kit)
Pt. # 432-19111 for 11-1 compression, OEM Replacement for VXR/VX HO

R&D/CP (.010” Oversize)
Pt. # 432-19810 for 8.6-1 compression .010” oversize for SHO/FZR (4 Piston Kit)
Pt. # 432-19910 for 9.5-1 compression .010” oversize for SHO/FZR (4 Piston Kit)
Pt. # 432-19010 for 10.5-1 compression .010” oversize for SHO/FZR (4 Piston Kit)
Pt. # 432-19110 for 11-1 compression .010” oversize for VXR/VX HO (4 Piston Kit)

R&D/CP (.020” Oversize)
Pt. # 432-19820 for 8.6-1 compression .020” oversize for SHO/FZR (4 Piston Kit)
Pt. # 432-19920 for 9.5-1 compression .020” oversize for SHO/FZR (4 Piston Kit)
Pt. # 432-19020 for 10.5-1 compression .020” oversize for SHO/FZR (4 Piston Kit)
Pt. # 432-19120 for 11-1 compression .020” oversize for VXR/VX HO (4 Piston Kit)



Carrillo High Performance Rods

Carrillo is recognized as one of the finest manufactures of connecting rods for high performance engines. Carrillo connecting rods are a precision, high strength, quality product that reflects the optimum balance between lightweight and durability. The Light weight forged design is substantially stronger and lighter than the OEM rod and will deliver the strength needed to perform reliably under high horsepower supercharged and turbo applications. Rod kit comes complete with Silicone Bronze wrist pin bushing and high strength fasteners.

R&D recommends upgrading to our High Performance Pistons and Rods in Turbo and Supercharger applications.

Pt. # 672-18000 (4 Rod Set)


Scroll down for photos of individual parts and detailed information. R&D VXR/VXS Performer Kit
Stock 66-67 mph @ 7500 RPM
R&D Performer Kit 70 mph @ 7800 RPM



R&D VXR/VXS Aquavein Intake Grate Part # 112-18020
R&D VXR/VXS Grate/Shoe Seal Kit Part # 162-00009
R&D VXR/VXS Power Plenum Filter Kit Part # 200-01805
R&D VXR/VXS Power Sleeve Intake Manifold Upgrade Kit Part # 232-18000
R&D VXR/VXS Pro Series Ride Plate Part # 122-180014
R&D VXR/VXS Cold Air Inlet Kit Part # 200-01806

Retail Price $765.70 Kit Price $699.95

The R&D Yamaha VXR performer Kit was developed to improve overall handling, pump efficiency and engine performance with easy to install entry level performance parts. Each component part listed can be installed and used as a stand-alone product. The R&D VXR Performer Kit has been extensively tested in all water conditions proving its performance and reliability. The addition of the R&D Performer Kit will add 2.5 miles per hour to top speed performance and transform the Yamaha VXR into a great handling and fun watercraft with one of the best mile per gallon values on the water! Order up some fun today!


Optional Performance parts:

R&D VXR/VXS R1 Reprogrammed ECU Part # 802-02801
R&D VXR/VXS Exhaust Resonator Removal Kit Part # 332-18005


Pt. # 992-01800


Scroll down for photos of individual parts and detailed information. R&D VXR/VXS Stage 1 Kit
Stock 66-67 mph @ 7500 RPM
R&D Performer Kit 71-72 mph @ 7950 RPM



R&D VXR/VXS Aquavein Intake Grate Part # 112-18020
R&D VXR/VXS Grate/Shoe Seal Kit Part # 162-00009
R&D VXR/VXS Power Plenum Filter Kit Part # 200-01805
R&D VXR/VXS Power Sleeve Intake Manifold Upgrade Kit Part # 232-18000
R&D VXR/VXS Cold Air Inlet Kit Part # 200-01806
R&D VXR/VXS R1 Reprogrammed ECU Part # 802-02801
R&D VXR/VXS Pro Series Ride Plate Part # 122-180014
R&D VXR/VXS Exhaust Resonator Removal Kit Part # 332-18005

Retail Price $1523.14 Kit Price $1399.95

The R&D Yamaha VXR Stage 1 Kit was developed to improve overall handling, pump efficiency and engine performance with easy to install entry level performance parts. Each component part listed can be installed and used as a stand-alone product. The R&D VXR Stage 1 Kit has been extensively tested in all water conditions proving its performance and reliability. The addition of the R&D Performer Kit will add up to 5 miles per hour to top speed performance and transform the Yamaha VXR into a great handling and fun watercraft with one of the best mile-per-gallon values on the water. Order up some fun today!

R&D recommends the use of 91 octane gas with all VXR Stage 1 and up Kits.


Pt. # 992-01801


FZR Engine Shims

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

R&D Inline Fuel Pressure Gauge Adaptor

The R&D Fuel Pressure Gauge Adaptor Tool is designed to be a plug in fuel pressure gauge that needs no modifications to install and use. Simply disconnect the OEM locking fuel connector from the fuel rail and plug the gauge tool directly into the connector. Plug the locking connector supplied on the R&D tool onto the fuel rail and lock. Use the tool to verify fuel pressure and fuel pump condition. Use the tool to set and verify base fuel pressure settings on the R&D Rising Rate Fuel Pressure Regulator (RRFPR). When finished, disconnect the tool and reconnect the stock fuel line. The adaptor installs inline between the OEM fuel rail and the R&D RRFPR via the OEM connectors for easy connect and disconnect. The R&D Tool works on both Yamaha and Kawasaki fuel systems. Installation time is only 2 minutes. Liquid filled fuel pressure gauge sold separately.

Pt. # 612-00081 Inline Fuel Pressure Gauge Adaptor
Pt. # 900-02180 Liquid Filled Fuel Pressure Gauge



Upgrade Kit


Complete Kit

R&D Tunable Raising Rate Fuel Pressure Regulator

The R&D Tunable Raising Rate Fuel Pressure Regulator enables the “raising rate” portion of the fuel pressure to be tuned. With the addition of two volume plates and three jets that change the internal volume and pressure the “raising rate fuel pressure curve” can be manipulated. The regulator comes with a baseline setup, which contains no volume plates or jets. The baseline setup will provide a larger increase in fuel pressure as boost increases. If a lower slope (leaner) is desired, the volume plates and jets can be installed to tune the raising rate fuel pressure. The regulator utilizes a tunable pressure relief port to lower the slope of the curve to dampen pressure transitions. Kit comes complete with a graph page indicating the increase in fuel pressure as boost increases with and without the volume plates and jets installed.

NOTE: Tuning the rising rate is necessary to be able to tune out rich spots in the fuel curve caused by varying intercooler performance.

Pt. # 802-00081 Tunable Raising Rate Upgrade Kit (for R&D RRFRP) Retail $135.95
Pt. # 802-00082 Tunable Raising Rate Fuel Pressure Regulator Kit Retail $425.00


R&D Rising Rate Fuel Pressure Regulator Kit

R&D offers a Yamaha specific fuel pressure regulator system allowing custom fuel pressure tuning to the EFI fuel systems fuel pressures. The R&D Fuel Pressure Regulator System offers a wide range of setup possibilities making it the only fuel pressure tuning system you will ever need. Base fuel pressure is adjustable from 5 to 80 PSI. The R&D fuel pressure regulator can also be set up to allow “rising rate” fuel pressure at a 1 to 1 ratio (One pound of fuel pressure gain over base for every pound of boost gain). The R&D System is 100 percent complete, installs directly to the top of the fuel tank, and connects directly to the fuel rail with OEM security lock connectors with no modifications. R&D offers high performance fuel hose that can be purchased by the foot, as well as the Oetiker style clamps. The R&D bypass style regulator system is capable of handling any fuel pump up to 250 GPH. Replace “Deadhead” regulator performance and experience the full flow volume and rock steady fuel pressure that only a dynamic R&D fuel pressure regulator kit can produce. Available for Sea-Doo, Yamaha, or Kawasaki watercraft.

• Fuel pressure will rise on a 1:1 ratio when boost referenced
• All ports are 1/4” NPT, with one inlet, 1 outlets, and one return port on the bottom.
• Beautiful type II bright dip anodized finish.
• Bypass design produces the ultimate, dynamic fuel delivery system.
• 1/4" pipe tapped for standard or AN fitting ready.
• R&D offers pre-assembled #4 AN hose to finish off a return system.
• R&D offers fuel hose by the foot for custom routing.

Pt. # 802-00080


R&D High Performance High Volume Fuel Pump Kits

R&D Performance carries a complete line up of high performance replacement fuel pumps. Each pump is machined specifically to fit the Yamaha fuel pump housing and are offered in a variety of flow ratings to facilitate from basic low cost replacement to an all out 500 H.P. Turbo or Supercharged race machine. All R&D fuel pumps have been precision flow rate tested and charted in (LPH) liters per hour.

NOTE: There are no modifications necessary to install the R&D fuel pump therefore switching back to the O.E.M. fuel pump assembly is quick and easy as well.

Pt. # 812-35190 R&D 190 LPH OEM Replacement Fuel Pump Kit
Pt. # 812-35255 R&D 255 LPH Low Pressure Fuel Pump Kit
Pt. # 812-35256 R&D 255 LPH High Pressure Fuel Pump Kit


R&D In-Tank Fuel Pressure Regulator Block Off Kit

R&D offers a Fuel Pressure Regulator Block off Kit which will allow the OEM stock in tank fuel pressure regulator to be removed, blocked off, and replaced with a billet part which is mandatory when installing an aftermarket externally adjustable fuel pressure regulator system. The OEM in tank fuel pressure regulator is fixed to maintain 40-43 pounds of fuel pressure at all times. For high performance Turbo or Supercharger applications where horsepower is boosted, it is necessary to install larger flowing fuel injectors and be able to tune the fuel pressure up or down as needed. Most factory race teams using the 1800cc power plant with a Turbo or Supercharger are running increased fuel pressure along with higher flowing fuel injectors and externally adjustable pressure regulators. The R&D Fuel Pressure Block off Fitting is the answer to quickly replace and block off the port. R&D has a complete line up of fuel pumps, fuel injectors, fuel pressure regulators, fuel gauge, and fuel hose accessories all designed specifically for the Yamaha VXR/FZR/SHO. All R&D fuel injection parts and products meet Coast Guard, I.J.S.B.A., and APBA approval.

Pt. # 812-35257


R&D 725 CC/1000 CC Pro Series Fuel Injector Kit

The R&D Pro Series injectors are offered in 725cc and 1000cc flow rates. Each set of injectors have been flow rate and voltage comp tested to insure linear accuracy and are shipped with a precision dead time (voltage compensation) chart that can be added into your aftermarket ECU’s software program under battery compensations. R&D Pro Series injectors offer perfectly clean linear response performance from low idle all the way through the entire power range. R&D Pro Series fuel injectors with a higher atomization spray pattern are easily capable of delivering fuel flow specifications to accommodate 400-500 horsepower Turbo or Supercharged VXR builds.

R&D has flow rate tested the O.E.M. Yamaha injectors and verified them to flow 396 cc at 43 PSI of fuel pressure, which rates them to flow 39 pounds of fuel per hour. The R&D Pro Series Fuel Injectors have been precision flow rate tested to 725cc at 43 PSI of fuel pressure, and 925cc at 70 PSI of fuel pressure, which rates them to flow as much as 92 pounds of fuel per hour. R&D fuel Injectors perform excellent, delivering precise fuel flow at fuel pressure ratings ranging from 40 to 80 PSI.  Each R&D injector set is packaged complete with all installation hardware, necessary harness interface connectors, voltage compensation chart, and instructions.

Pt. # 812-18001  R&D Pro Series 725cc Injectors (set of 4)
Flow Rate: 725cc at 43.5 pounds of fuel pressure= 72 pounds per hour fuel flow
Flow Rate: 925cc at 70.0 pounds of fuel pressure= 92 pounds per hour fuel flow

Pt. #812-18002  R&D Pro Series 1000cc Injectors (set of 4)
Flow Rate: 1000cc at 43.5 pounds of fuel pressure=100 pounds per hour fuel flow
Flow Rate: 1225cc at 70.0 pounds of fuel pressure=120 pounds per hour fuel flow


VXR High Flow Exhaust Kit

The R&D VXR High Flow Exhaust Kit adds noticeable low end and mid range power and top end performance! The R&D High Flow Exhaust Kit adds a great performance sound with no drown to the VXR while maintaining a safe and under IJSBA and Coast Guard approved 86 db!

Pt. # 332-18006

Exhaust Resonator Removal Kit

The R&D Exhaust Resonator Removal Kit will allow the sound suppression ball to be removed and plugged. When removing the exhaust sound suppression ball and modifying the exhaust hose, low end response is gained and trapped hot exhaust gases can be evacuated quicker through less restriction or back pressure.

Pt. # 332-18005

R&D Billet Exhaust Outlet


Pt. # 331-30000 3" Diameter
Pt. # 331-32750 2.75" Diameter
R&D High Temperature Silicon Couplings

Pt. # 061-30030 3"-3"
Pt. # 061-32500 3"-2" Reducer
Pt. # 061-32501 2.75"-2.5" Reducer
Pt. # 061-32750 3"-2.75" Reducer

R&D FX HO Recreational Engine Cooling Kit

The R&D FX HO Yamaha Recreational Engine Cooling Kit was developed for high performance recreational uses where the O.E.M. thermostat will remain and be used. The R&D recreational cooling kit offers an additional ½’ water line to offer 25 percent more additional water volume flow through the engine and oil cooler as well as slightly increase water pressure. The O.E.M. cooling system has a very low water pressure (10 P.S.I. at 7600 rpm’s) and a low water volume flow. The new R&D kit will lower engine block and head temperatures by 15-20 degrees. R&D suggests adding additional cooling system upgrades to compensate and lower engine temperatures when installing aftermarket ECU’s with timing advancements and various performance part upgrades. The R&D Cooling Kit arrives 100 percent complete with pre-cut hoses, “T” connectors, dual line pump block, through hull bulkhead fittings, hose clamps, and detailed instructions with pictures. R&D recommends the cooling system to be upgraded as a stand alone performance upgrade and a must have kit addition when riding in extreme air and water temperatures.


• Better throttle response, increased horsepower
• Cooler header and under seat temperatures
• Cooler cylinder and cylinder head will reduce knock
• Cooler oil will lubricate better and last longer
• Increased engine protection

Pt. # 660-18006 Single line addition


R&D Block Thermostat Cooling Kit

The R&D Block Thermostat Kit Option was developed to offer a way to run “Dual Thermostats” to the engines cooling system to control and allow warm up and pre heat cycles to take place. Engine Block and Head cooling on the Yamaha Engine becomes difficult when running high compression ratios, higher boost levels, and aggressively advanced ignition timing. R&D has found that multiple cooling lines need to be added to the cooling system to provide enough volume to keep temperatures stable and in check. The problem is the Single OEM thermostat is too restrictive and doesn’t allow enough water volume flow to reduce temperatures with the added cooling lines. R&D has found a way to add an additional thermostat that allows enough water flow volume to cool the engine and head and retain the O.E.M. method for engine pre heat or warm up. The R&D Kit installs as a bolt on kit directly in place of the corrosion anode. Running two thermostats allows enough water flow to cool the engine properly. The R&D thermostat kit option will start to open at 120 degrees, and will allow full flow at 140 degrees. The O.E.M. stock thermostat opens at 118-126 degrees and allows full flow at 140 degrees. Having two thermostats installed that are full open at 140 degrees, and flow enough water volume, will help to keep engine block temperatures to between an ideal 150-175 degrees. R&D has done extensive testing with the engineers at MoTeC both on the Dyno and on the water to determine that 150-160 degrees block temperatures is where the most peak power is, any hotter and power diminishes. The R&D dual thermostat kit will be a must have addition where engines are being run in extreme cold water and weather conditions. There have been many debates over these theories, and until now there has been no way around extended warm up cycles to bring engine temps up before high engine loads can be applied. R&D has found a way to end the debate and give everyone what they are looking for in a complete cooling system.

Pt. # 660-18004


R&D FX HO Offshore/Racing Dual Line Engine Cooling Kit

The R&D FX HO Yamaha Recreational Engine Cooling Kit was developed for high performance recreational and offshore racing uses where dual water lines will be added to the O.E.M. system and the O.E.M. thermostat will be removed for maximum water flow through the engine. The R&D Racing cooling kit offers Two additional ½’ water lines to offer 50 percent more additional water volume flow through the engine and oil cooler as well as slightly increase water pressure. The O.E.M. cooling system has a very low water pressure (10 P.S.I. at 7600 rpm’s) and a low water volume flow. The new R&D kit will lower engine block and head temperatures by 20-25 degrees. R&D suggests adding additional cooling system upgrades to compensate and lower engine temperatures when installing aftermarket ECU’s with timing advancements and various performance part upgrades. The R&D Cooling Kit arrives 100 percent complete with pre-cut hoses, “T” connectors, dual line pump block, through hull bulkhead fittings, hose clamps, water by-pass fittings, the thermostat removal sealing washer, and detailed instructions with pictures. R&D recommends the cooling system to be upgraded as a stand alone performance upgrade and a must have kit addition when installing power adders such as R&D Turbocharger Kits, Engine Performance Parts, and Engine Management Kit parts. Cooler engine and oil temperatures produce higher horsepower with decrease detonation.


• Better throttle response, increased horsepower
• Cooler header and under seat temperatures
• Increased power with cooler air inlet temperatures
• Cooler cylinder and cylinder head will reduce knock
• Cooler oil will lubricate better and last longer
• Increased engine protection


Pt. # 660-18007 Dual line addition


R&D Pro Pitch Impeller

Note: R&D also has replacement Impellers available for the Yamaha VXR

Pt. # 132-11319 R&D/Skat-Trak 13/19 Stainless Steel Replacement Impeller which will directly replace damaged or worn O.E.M. Impellers.


Pt. # 132-11218 R&D/Skat-Trak 12/18 Stainless Steel High Performance Impellers will work well in south of the equator areas where salt water is known to be heavier, as well as air quality to be heavier on humidity.


Pt. # 132-11219 R&D/Skat-Trak 12/19 Stainless Steel High Performance Impellers will work well in the R&D Performer and Stage 1 Kits using R1, R2 or R3 ECU Programs. The 12/19 is the overall R&D Team favorite for all around best low end response, as well as great top speed performance (.5 MPH speed improvement over stock)






R&D Handlebar Grip Kit

The R&D grip kit replaces the oversized OEM grips with a smaller diameter motocross grip. The small diameter grip design enables you to have a much stronger hold on the handlebars. The R&D kit comes complete with billet bar extenders and R&D/Renthal half waffle gray grips in a medium hardness.


Pt. # 532-01805



R&D High Performance Racing Head Gasket

R&D High Performance Racing Head Gaskets were developed to replace the O.E.M. head gasket with a higher performing Multi Layer Steel Stack Design (MLS), utilizing state of the art materials proven to withstand extreme heat generated from high cylinder pressures in high boost performance packages. Each gasket is deep dual embossed (both sides) and Viton Coated to promote a positive seal. Use the R&D Head Gasket with confidence in standard replacement situations or Pro Race Engines. Our race proven design maintains a positive seal with up to 24 pounds of boost. Available in STD 86, 86.5, 87, 87.5, and 88mm bore sizes. R&D also offers a “Super Thin” Gasket that will raise the compression level when changing piston ratio is not an option.

NOTE: R&D can make upon request and specific thickness additions that may be needed when cylinder blocks are decked during sleeving or cylinder heads are resurfaced during head repair.  Simply add the total amount that is cut from the block and head and add .027 to arrive at a new total head gasket thickness. R&D also offers Custom R&D/CP High Performance pistons to fit any bore size R&D Head Gasket. Gas porting also available upon request.

NOTE: NO need to re-torque the head bolts after initial installation which is a big plus on DOHC engines where cams would otherwise need to be removed. Head torque specifications are included with each gasket

Pt # 080-01800 R&D 86mm HP Head Gasket .027” 3 Layer
Pt # 080-01801 R&D 86.5 HP Head Gasket .027” 3 Layer
Pt # 080-01802 R&D 87 HP Head Gasket .027” 3 Layer
Pt # 080-01803 R&D 87.5 HP Head Gasket .027” 3 Layer
Pt # 080-01804 R&D 88 HP Head Gasket .027” 3 Layer
Pt # 080-01810 R&D HP Head Gasket .018” 2 Layer (Specify Bore Size)


 

 
R&D Cam Tensioner Gasket

R&D's new Cam Tensioner Gasket has a metal reinforced center that enables it to be reusable.

Pt. # 080-21025

R&D Front Cover Gasket

R&D's new Front Cover Gasket features a metal reinforced center that enables it to be reusable when servicing the supercharger clutch.

Pt. # 080-21024

Drive Shaft Holding Tool

The R&D Drive Shaft Tool is necessary to properly secure the drive shaft in a vise to remove and replace the prop.

Pt. # 132-55100



R&D Yamaha 4-strokes Dial Indicator Kit

The R&D Dial Indicator Kit is custom designed to mount directly into the Yamaha head, making the job of finding top dead center to change cam timing easy.

Pt. # 612-80011


R&D Valve Stem Concentricity Gauge

The R&D Valve Stem Concentricity Gauge is a testing tool to check the roundness and trueness of valves. Small valves can distort or bend from heat produced in high performance supercharged or turbo charged engines. To achieve a perfect seal on the seat the valve needs to be concentric and true in every dimension. Gauge is fully adjustable to accommodate a variety of valve sizes and features a rigid, positive stop that can be set once and the trueness for an entire set of valves can be measured. Kit comes complete with dial indicator accurate to .001”. This is a must have tool for any engine builder to get the most out of your high performance 4 stroke engine.

Pt. #612-80010


R&D Cam Tensioner Tool

The R&D Cam Tensioner Tool is designed to mechanically spring preload the cam chain in order to set and verify cam timing. This eliminates the process of pressurizing the hydraulic cam tensioner to verify cam timing. 

Pt. # 612-92015

 
R&D Valve Spring Compression Tool Kit

The R&D Valve Spring Compression Tool Kit allows easy removal of the intake or exhaust valve springs and keepers without removing the cylinder head. R&D recommends using the compression adapter from a compression gauge kit to pressurize cylinder keeping valves in place during removal of springs and keepers.

Pt. # 612-92013

R&D’s “BIG ASS” Prop Wrench

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is LEVERAGE! The 28” long wrenches are made from ½” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches.

Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster

Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet

Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VXR/VXS
Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099)

Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS/VXR/VXS (Pt. # 132-55100)

Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR

Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”

Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ/VXR/VXS



R&D’s “BIG ASS” Coupler Wrench

R&D's Big Ass Coupler Wrench takes the fight out of removing the tough to remove SHO/FZR driveline couplers. The key is LEVERAGE! The 37” long wrench is made from ½” plate aluminum and utilizes an indexing shape the mirrors that of the coupler to give maximum support to the coupler so it will not be damaged in the removal process. With this tool your coupler changing headaches are over, guaranteed. 

Pt. # 132-57002

R&D/Innovate Digital Wideband Air/Fuel Ratio Gauge

Professionally tune your engine with complete confidence. The new gauge utilizes Innovate’s patented 100% digital wideband technology that is faster and more accurate than analog designs. To put this into perspective, at 8000rpm the Digital MTX gauge will see a change in air/fuel ratio 24 revolutions of the crankshaft sooner than all other gauges on the market! Several new features have also been added to the gauge design including an integrated wideband controller for simplified installation. By integrating the wideband controller within the gauge, the 02 sensor can now be plugged directly to the gauge via the 8 foot long interface cable. In addition, the included O2 sensor is compatible with all popular fuel types and can be quickly and easily calibrated to compensate for sensor wear, changes in atmosphere or other variables. A newly designed gauge body features a weatherproof o-ring seal that protects the gauge from water, dirt, or other elements. To allow for a customized look, each kit also includes 2 gauge bezels (black/silver) and 2 faceplates (black/white) that are completely interchangeable. Take the guess work out of tuning, recommend by R&D to tune all high performance 4-stroke watercraft.

KEY FEATURES:

• The only 100% digital wideband air/fuel ratio technology available (Patented)

• Water Resistant 52mm (2 1/16”) round dash-mountable casing is perfect for automotive, powersports, marine, and demanding racing applications.

• Built-in “Direct Digital™” Wideband Controller reduces wiring and simplifies installation.

• Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included.

• Wideband O2 sensor (included) is compatible with all fuel types including leaded and unleaded gasoline, diesel, methanol and E85.

• Instant and dead-on accurate sensor calibration. Easy user calibration that compensates for sensor wear and for barometric correction.

• The Innovate system utilizes sensor feedback to determine when the sensor is damaged. The gauge will display an error as opposed to erroneous data displayed by other systems.

• (2) 0-5v fully programmable linear analog outputs for use with engine management systems “closed-loop” and external data loggers.

• Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display.

• Data log on your PC using the included LogWorks software.

• Serial IN and OUT ports allows for easy connection with Innovate’s “Modular Tuning System” or other compatible devices.


Pt. # 900-04378

O2 Sensor Mount Kit

The R&D O2 Sensor Mount Kit allows for easy installation of an AFR gauge into the Yamaha exhaust system. It simply replaces the OEM plug and installs directly into the OEM exhaust pipe without any modifications. Kit comes complete with installation tool. Fits Yamaha VXR, VXS, FZR, SHO, FX-140, H/O, GPR, and VX 110. AFR gauge sold separately.

Pt. # 332-18010


R&D/TTO Tachometer

The R&D/TTO Tach is water resistant and will monitor two and four stroke single and multiple cylinder applications to 10,000 rpm within 10rpm accuracy. Functions including: peak rpm memory, hour meter, rpm recall and constant rpm display.

Pt. # 802-12104



EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122

  © 2004 R&D Performance Products USA. All Rights Reserved.