R&D’s “BIG ASS” Prop Wrench

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is LEVERAGE! The 28” long wrenches are made from ˝” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches.

Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster

Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet

Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VX
Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099)

Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS (Pt. # 132-55100)

Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR

Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”

Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ



EZ-Slide Bunk Glides

The new R&D EZ-Slide Bunk Glides are designed to mount directly on the top side of the trailer bunks creating a new low friction slippery surface that allows the watercraft to glide on or off the trailer, making loading and unloading a personal watercraft easy. Designed and molded from high density urethane to significantly support the hull surface for proper trailering. The EZ-Slides are black in color and come in a six piece set complete with stainless steel button head mounting hardware. One set needed per watercraft. Order a set today and take the work out of loading and unloading your watercraft.

Pt. # 001-00122


XL 1200 Ltd. Engine Shims - Now Available

Engine Shims are essential for precise engine alignment. R&D Engine Shims have a tab that provides easy insertion and removal. Shims are made of stainless steel and have etched numbers to identify thickness. Shims available in thickness of .005", .010", .015", .020", .025", .030", .050".

XL 1200 Ltd. Cat Temp Sensor Chip - Now Available

The R&D Cat Temp Sensor Chip is a must when replacing the OEM Catalytic Converter with the R&D D-plate on your Yamaha GPR 1200. The Temp Sensor imitates the signal sent to the OEM CDI by the Catalytic Converter’s temperature probe preventing CDI flutters, warning devices sounding and engine shut downs due to cat removal. The use of this sensor is only necessary with the OEM CDI. Plugs directly into factory wiring harness.

Pt. # 802-12001

XL 1200 Ltd. Aquavein Intake Grate - Now Available

The R&D XLL Aquavein Intake Grate is now available. This Intake Grate is the only Intake Grate on the market that improves hook up, handling, acceleration and adds top speed. Easily installs in minutes using basic tools.

Pt. # 112-12001

XL 1200 Ltd. D-Plate - Now Available

The new R&D D-Plate takes the place of the stock Catalytic Converter and delivers the best overall low, mid, peek and overall horsepower. The benefits include reducing engine compartment temperatures created by the catalytic converter and reliability of the complete stock exhaust assembly.

Pt. # 332-12000

XL 1200 Ltd. Pump Seal Kit - Now Available

R&D's new 8 piece Pump Seal Kit for the XLL stuffs up all those unwanted cavities in the pump shoe that aid in producing cavitation. Reducing cavitation equals greater performance.

Pt. # 162-00001

XL 1200 Ltd. Cast Aluminum Head - Now Available

The new Red Head from R&D will get your XLL motor running. This affordable precision cast design delivers all the performance of billet without the staggering price tag. Raising the OEM compression ratio boosts the horsepower and torque throughout the rpm range, increasing acceleration and speed. Available in 41cc, 39cc, and 37cc ranges and comes with all hardware. (Girdle kit hardware sold separate).

Pt. # 412-20041

XL 1200 Ltd. Anti-Cavitation Cone - Now Available

The new R&D Anti-Cavitation Cone is now available. The unique patent pending design balances the bowl pressure in the last stage of the pump to eliminate detectable cavitation. Improving bottom end punch, midrange pull and overall performance. Recommended for use with Limited and Superstock watercraft.

Part # 162-12003

XL 1200 Ltd. Power Plenum Filter - Now Available

The new R&D Power Plenum for the XLL 1200 is now available. Dyno tested and championship proven Power Plenum Filters generate the maximum airflow and volume, period. Which means more horsepower, increased throttle response, acceleration and top speed. The exclusive lightweight R&D design incorporates velocity stacks and is engineered to improve air speed. The unique Pro-Lock base allows for quick removal, for those spontaneous carb adjustments. They are maintenance free, all you have to do is bolt them on and go. Immediate championship performance for your Yamaha.

Pt. # 200-00142

XL 1200 Ltd. Ride Plate - Now Available

The new R&D XL 1200 Ltd. ride plate offers the best bolt-on performance you can do to improve handling and stability. Designed to deliver the ultimate ride while improving speed.

Pt. # 122-12004

R&D/TTO Tachometer

The R&D/TTO Tach is water resistant and will monitor two and four stroke single and multiple cylinder applications to 10,000 rpm within 10rpm accuracy. Functions including: peak rpm memory, hour meter, rpm recall and constant rpm display.

Pt. # 802-12104

  © 2004 R&D Performance Products USA. All Rights Reserved.