Stock FX H/O Average Speed 58 @ 10,050
 

Description of Parts RPM Top Speed
R&D FX H/O/Cruiser Ride Plate Kit
Part #: 122-16000
10,050 59-59.5 mph
R&D FX H/O Power Plenum Breather Kit
Part #: 200-00143
10,100 60mph
R&D FX H/O Pump Shoe Seal Kit
Part #: 162-00002
10,100 60 mph
R&D FX H/O Aquavein Grate
Part #: 112-14000
10,100 61 mph
 

Total:

$463.13
R&D Solas FX H/O 14/20 Dynafly Option
Part #: 132-011420

10,200

62 mph

Parts/Kit Overview

The R&D Yamaha FX H/O/FX CRUISER performer kit was developed to significantly improve handling and overall engine performance with easy to install entry level performance parts! Each component part listed can be installed and used as a stand-alone product! The R&D FX H/O performer kit has been in the testing and development stages for two years, creating a ride plate and sponson kit combination that will eliminate the annoying hunt or bow search noticed while riding at top speeds. The addition of the R&D performer kit will transform the FX H/O or FX H/O Cruiser into one of the best handling watercraft on the water! Order up some fun today!

  • The R&D performance ride plate, which is specifically designed for the FX H/O is increased in length over stock and has a steeper rocker section, which will add top speed and eliminate the hunt or bow search noticed in the stock ride plate. Also, smoother and tighter turns can be carved and straight-line stability is significantly increased. The O.E.M. speedometer is relocated to the rear of the plate for higher speed accuracy.

  • The R&D Power Plenum Breather Kits unique design will flow much more air than the O.E.M. filter. O.E.M. filters are notorious for becoming over oil saturated causing sluggish low-end power and a loss of up to 500 RPMs! The R&D replacement breather will never become over oil saturated, making it the only replacement choice! Easy to install in 5 minutes, adds a great sound tone, and adds RPMs.

  • The R & D pump shoe sealer kit will seal up the FX H/Oís pump shoe and pump inlet to promote reduced cavitation, much better hook-up, and add top speed performance.

  • The R&D Yamaha FX H/O Aquavein Intake Grate has been in the design, development and testing stages for 2 years! The new R&D FX H/O Aquavein will significantly reduce cavitation, increase acceleration, add up to 1 mph on top end performance, and keep the H.O. pump loaded and hooked up! Works great on aftermarket supercharged models as well.

  • The R&D Solas FX H/O 14/20 Dynafly is a great replacement impeller over stock! Increased acceleration and 1 mph plus top speed performance gain!
     

  © 2004 R&D Performance Products USA. All Rights Reserved.