2016-2018 VX/VX LTD/VX DELUX/VX CRUISER Performer-Stage 2 Kit56-57 MPH @ 7900
Stock VX Limited Average Speed 52 @ 7450-7500

Description of Parts
R&D R2 ECU Re-Program Package
Part #: 802-00702
R&D TR1 Power Plenum Filter Kit
Part #: 200-01050
R&D Aquavein Intake Grate
Part #: 112-18005
R&D Ribbon Delete Kit
Part #: 612-17995
R&D Ride Plate Modification (Speed Plate)
Part #: 122-18003
R&D Sponson Kit
Part #: 122-01805
R&D Single Line Cooling Kit
Part #: 660-18006
R&D Solas Impeller
Part #: 132-40319

Parts/Kit Overview

The R&D Yamaha VX Series (3 Cylinder 1050 TR1 Engine) Performer/Stage 1 Kit was developed to significantly improve overall engine performance with easy to install entry level performance parts! Each component part listed can be installed and used as a stand-alone product! The R&D Performer Kit has been a very popular kit with added engine performance that increases overall engine performance especially two passenger (2 Up). Order up some fun today!

R&D High Performance ECU Reprogramming Services
VX, VX Deluxe, VX Limited, VX Cruiser W/1050cc TR1 3 Cylinder Engine 2016/2017/2018
Part # 802-00701 R&D TR1 R1 ECU…. ECU is reprogrammed with rev limiter settings to allow up to 8250 RPM’s. Ignition Timing is upgraded (slightly advanced) which is super safe for all recreational and offshore use. Fuel tables are re-worked and improved for cleaner and smoother running with safe AFR’s. R1 works great with the stock impellor. R1 recommended fuel is 91 octane pump gasoline.

R&D Pro Flow Air Filter Kit
R&D’s new front mount TR1 Air Filter Kit replaces the restrictive O.E.M. “flat filter” with an economical answer to great performance on a budget. R&D has designed the Ultimate Air Filter kit to feed the TR1 3 CYL power plant with a simple “Long Cone Filter” that installs in minutes with a screw driver. The system is designed and tested on R&D’s Super flow Air Flow bench to accurately measure pressure restriction inside the O.E.M. airbox while also using a magnehelic gauge to measure inches of water to document negative restrictions that hinder quick intake manifold and cylinder filling. The R&D System utilizes an oversized and specifically designed high flow R&D Power Plenum Filter that rubber mounts inside the airbox. The O.E.M. airbox design works well to keep water out of the engine, and the R&D Pro Flow Filter works to unlock the restrictions. The washable and reusable design means this will be the last filter you will ever have to buy.
Pt # 200-01050

R&D INTAKE MANIFOLD RIBBON DELETE KIT
The R&D Intake Manifold Ribbon Delete Kit was developed to increase airflow volume into the intake system by relieving restrictions. The R&D Intake Manifold Sleeve replaces the OEM intake ribbon producing a 40 CFM increase in air flow. The R&D billet sleeve mounts between the intake manifold and the throttle body creating a superior Venturi effect. The R&D Intake Kit will add low end and mid range throttle response. The R&D Intake sleeve is an absolute must have part to remove intake restrictions. True horsepower gains on the Yamaha start right here with the R&D Intake Sleeve. More airflow will equal more power. Note: The Kit comes complete with install jig to cut out the oem ribbon which is molded into the plastic manifold. A 2.750” hole saw (required) is sold separately or available at your local hardware store.
Pt. # 612-17995

R&D Aquavein Intake Grate
The R&D Yamaha VXR/VX HO Aquavein Intake Grate Kit has been designed and developed to deliver the ultimate handling and top speed performance in recreational, offshore, and closed course race conditions. The R&D Aquavein will produce maximum pump hook up with noticeably quicker acceleration, higher top speed performance and a much smoother and more predictable ride over the OEM intake grate in rough water conditions. * For proper installation R&D recommends the use of the R&D Pump Shoe Seal Kit (Pt. # 162-00023)
Pt. # 112-18005 Aquavein
Pt. # 162-00023 Pump Shoe Seal Kit

R&D Pro Series Ride Plate Modifications
R&D offers two option specific ride plate modifications that work very well to add Top Speed improvements, while also increasing overall handling performance. The R&D “Speed Mod” has proven to add 1-1.5 MPH in Top Speed performance, and works fantastic for the weekend recreational warrior who wants a Great “Speed Adder” and great handling! The R&D “Race Mod” works well in serious offshore “OCEAN” conditions where an extended design works superior in super rough conditions! Keeps the craft flat and moving forward in super rough conditions! Send R&D your ECU and Ride Plate for a 6 MPH Gain! Top Speed Improvement Averages Adjustable Design (can be custom shimmed) Championship Proven Design Concepts Unique Multi-step Concept Improved Straight Line Stability
Pt. # 122-18003 NOTE: Specify Modification at order checkout

R&D Sponson Kit
The R&D Yamaha VXR/VX HO Sponson Kit was developed to deliver improved handling stability and much smoother top speed performance averages in recreational, offshore, and closed course race conditions. The kit also reduces chine walking in hard 90° and 180° turns, and is super stable at high top speeds! The R&D Sponson works exceptionally well “2 Up” (Passenger)! No other sponson works better, or is more versatile in all areas!
Part #: 122-01805

The R&D/SOLAS Pro Pitch Series Impellers. (YAMAHA 1050 3 CYL N.A. / 155mm Pump)
Pt. # 132-40913 R&D/Solas Dynafly 9/13 Stainless Steel Replacement Impeller which will directly replace damaged or worn O.E.M. Impellers. Works excellent in 2016 and up VX Series as a direct replacement Impeller. Will also work best for (Higher) 3000-5000 Ft. Elevations, as well in south of the equator areas where salt water is known to be heavier, as well as in air quality to be heavier on humidity.
Pt. # 132-40215 R&D/Solas Dynafly 12/15 Stainless Steel High Performance Impeller. Pro Pitch custom.
Pt. # 132-40317 R&D/Solas Dynafly 13/17 Stainless Steel High Performance Impeller. Pro Pitch custom.
Pt. # 132-40319 R&D/Solas Dynafly 13/19 Stainless Steel High Performance Impeller. The 13/19 also is a premium choice for R&D Performer and Stage 1 Kits using R1, R2 or R3 ECU Programs. The 13/18 is the overall R&D Team favorite for all around best low end response, as well as great top speed performance (1 MPH speed improvement over stock)
Pt. # 132-40420 R&D/Solas Dynafly 14/20 Stainless Steel High Performance Impeller.

  © 2004 R&D Performance Products USA. All Rights Reserved.